The picture of this fly does not do it justice. It is absolutely awesome looking in person. I cannot wait to try it out. Once again, I'm using (purple) craft fur for the main body, along with purple angel hair over top. Underneath, something you can't really see is opalescent estaz. Amherst feathers and a blue collar round it out.
I'm hoping to jump out for a couple of hours later today. This is the fly I'm putting on before leaving the house.
Showing posts with label fly of the week. Show all posts
Showing posts with label fly of the week. Show all posts
Jan 10, 2013
Fun with Craft Fur, Part 4 -- Tube
I know I swore off tube flies a while ago. The main reason is that I find them a pain in the arse to rig while on the water. However, I may of found a way to make it a little easier. So, with that in mind, I'm tying a few tubes here and there.
Once again, I've made an enormous head. The beauty of tying on a tube is that you can trim the tube so that the heads aren't long like this! However, I was stupid in that I tied some thread way up top prior to putting any fur on. I inadvertently screwed up one of the best reasons to tie on these things. Oh well. Lesson learned. Lucky for me, the fish won't care.
This fly is not weighted. I will pinch split shot on prior to fishing it. Depending on how deep I want to get in whatever run I'm in. All in all, I'm pretty excited to give it a swing.
Once again, I've made an enormous head. The beauty of tying on a tube is that you can trim the tube so that the heads aren't long like this! However, I was stupid in that I tied some thread way up top prior to putting any fur on. I inadvertently screwed up one of the best reasons to tie on these things. Oh well. Lesson learned. Lucky for me, the fish won't care.
This fly is not weighted. I will pinch split shot on prior to fishing it. Depending on how deep I want to get in whatever run I'm in. All in all, I'm pretty excited to give it a swing.
Nov 26, 2012
Fun With Craft Fur, Part 3 -- Winter Fly
This winter fly is a mix of synthetic and natural. The orange is finn racoon, while the blue is craft fur. The flash is a combination of several colors that were tied over the blue. Duck flank was used for the collar.
The whole fly is around 3 inches long. Which seems to be the length I've been sticking to lately. It is large enough to attract the attention of fish in colored water, but small enough where it doesn't affect my casting in the least bit. There is no weight built into the fly. I can easily pinch some split shot on the leader while at the river.
Ignore the messy head. I've pretty much stopped caring what they look like. As long as the fly holds together, it's all good.
Nov 24, 2012
Fun With Craft Fur, Part 2
Happy Thanksgiving people. I was supposed to be posting more pics of my fly tying, but became a little pre-occupied with family things. I've actually been tying a lot of winter flies the past week or so, I hope to start posting them soon. They combine natural materials with synthetics. Some of them are looking really fishy. Can't wait to try them out.
This fly has been used successfully on the Deschutes in the mornings. The wing is some synthetic fur of some type that I've accumulated over the years. If I'm not mistaken, it is tied on a size 4 hook.
This fly has been used successfully on the Deschutes in the mornings. The wing is some synthetic fur of some type that I've accumulated over the years. If I'm not mistaken, it is tied on a size 4 hook.
Oct 24, 2012
Fun with Craft Fur, Part 1
It has been a long time since I've posted any pictures of my fly tying. It isn't that I haven't been tying them, I just haven't taken any pictures. I decided it was time to get back to it. So, over the next week, I'll post a handful that I've created with craft fur.
The craft fur kick began quietly a while ago. However, it has escalated into my material of choice. It is easy to use and looks great in the water.
This one, as you can imagine, sinks like a rock. I've been using it in deeper water or really fast currents. I've gotten some pulls on it. So, I know the fish are watching.
I'm heading off to fish the Klickitat tomorrow. And of course, I'll be dragging along a box of flies made of synthetic material. I'll mix it up with some made with more traditional materials and report back with the results. Of course, that assumes I'll even get a grab. Fingers crossed.
The craft fur kick began quietly a while ago. However, it has escalated into my material of choice. It is easy to use and looks great in the water.
This one, as you can imagine, sinks like a rock. I've been using it in deeper water or really fast currents. I've gotten some pulls on it. So, I know the fish are watching.
I'm heading off to fish the Klickitat tomorrow. And of course, I'll be dragging along a box of flies made of synthetic material. I'll mix it up with some made with more traditional materials and report back with the results. Of course, that assumes I'll even get a grab. Fingers crossed.
Jan 17, 2012
First real tube fly attempt
Occasionally I get an email asking why I no longer post pictures of flies I've tied. Well, the answer is simple. I haven't been tying much of anything. Sure, I've done some here and there. But, for the most part, I have so many flies in my Summer and Winter boxes that I haven't had a need to tie any.
I saw some pictures on Spey Pages of tube flies that some of the members had posted. I was inspired and decided that I'd like to tie one. To me, the biggest advantage of a tube is that you could use any length you want, tie material on and stop at any moment it looked good. Snip the tube, melt a lip on the end and you're done. Added bonus, when I'm brushing feathers back with my hand, I don't get poked.
This is my first serious try at a tube. Other than the humungo head, it came out pretty well. If I were a fish, I'd eat it. The copper colors look great in the water. This thing is about 3.5 inches long and swims great.
I'm still on the fence about the on-river functionality of tubes. They are a huge pain in the butt to rig while standing in the water.
I saw some pictures on Spey Pages of tube flies that some of the members had posted. I was inspired and decided that I'd like to tie one. To me, the biggest advantage of a tube is that you could use any length you want, tie material on and stop at any moment it looked good. Snip the tube, melt a lip on the end and you're done. Added bonus, when I'm brushing feathers back with my hand, I don't get poked.
This is my first serious try at a tube. Other than the humungo head, it came out pretty well. If I were a fish, I'd eat it. The copper colors look great in the water. This thing is about 3.5 inches long and swims great.
I'm still on the fence about the on-river functionality of tubes. They are a huge pain in the butt to rig while standing in the water.
Aug 6, 2010
Fly #56, 57, and 58. Umpqua
It has been a while since I've posted a "Fly of the Week". As I'm about to depart for a trip to the North Umpqua, I quickly tied up some flies. Here are three of the patterns I put together. Perhaps I'll post the others another time.
The first two are on size 4 hooks. The last on an eight. As always, click on the image to see them bigger.



I'll let you know how they do in a week or two.
The first two are on size 4 hooks. The last on an eight. As always, click on the image to see them bigger.



I'll let you know how they do in a week or two.
Jan 18, 2010
Fly #53, 54, and 55: Summer steelhead flies
Thought I'd post a few flies I tied recently. They are rather generic and are meant for low/clear water.
The body is peacock herl and oval tinsel ribbing.
Jan 13, 2010
Fly #52: Green Steele Spider
Does this fly look familiar? It should, other than a couple of color changes, it is pretty much identical to my Blue Steele Spider. The blue version has been a great fly. Very productive for steelhead. For a change-up, I decided to tie one in green.
I won't bother with a description of the materials, you can figure it out pretty easily. Although I haven't fished this color yet, I'm confident it will produce in the right water conditions and with the right presentation.
I won't bother with a description of the materials, you can figure it out pretty easily. Although I haven't fished this color yet, I'm confident it will produce in the right water conditions and with the right presentation.
Fly #51: Green Fuzz
I've been experimenting with various synthetic materials lately. One of which is Polar Fiber. My first tie with the material produced a nice flowing streamer in various shades of green and blue. It looked so good, that I decided to incorporate it into the body of a steelhead fly. In this instance, it was spun on a dubbing loop.

When you put this guy in the water, it has a really nice translucence to it. Additionally, it moves quite nicely. I can't wait to try it out.

When you put this guy in the water, it has a really nice translucence to it. Additionally, it moves quite nicely. I can't wait to try it out.
Aug 10, 2009
Fly #50: A couple of winged steelhead patterns
Starting off with a flashy wing, this steelhead fly is tied on a size 8 salmon hook. Dubbing is arctic fox with oval tinsel ribbing. The tag is silver tinsel. Generally, I'd use this during high or off color water. Or in some cases, when nothing else seems to be working.

The second fly is made up of much more muted tones. I'd use this on clear water. However, if the water is really low, I'd probably opt for a fly that is more sparse than this.

I decided to use hare's ear for dubbing. I don't do this very often on steelhead flies. Not sure why, it really has great buggy qualities that would attract trout or steelhead that have been in the rivers for a while.

The second fly is made up of much more muted tones. I'd use this on clear water. However, if the water is really low, I'd probably opt for a fly that is more sparse than this.

I decided to use hare's ear for dubbing. I don't do this very often on steelhead flies. Not sure why, it really has great buggy qualities that would attract trout or steelhead that have been in the rivers for a while.
Fly #49: Blue Spider Steel
A recent re-stocking of tying material included some blue hackle. While I'm a big fan of neutral tone flies, patterns very similar to this have caught both trout and steelhead.

I firmly buy into the thought process that presentation is far more important than fly choice. If you are targeting trout during a hatch, you may want to roughly match it. However, when a hatch isn't on, you can catch fish on just about anything if you make it move the right way.

I firmly buy into the thought process that presentation is far more important than fly choice. If you are targeting trout during a hatch, you may want to roughly match it. However, when a hatch isn't on, you can catch fish on just about anything if you make it move the right way.
Fly #48: Feather Wing
In order to prepare for Fall, I've been tying a few steelhead flies. The one you see below was tied on a size 8 salmon hook. Flies similar to this have been very successful in the Central/Northern Californian steelhead waters.

Generally speaking, I have more confidence in flies with natural tones. Besides working on steelhead, this will also catch trout and if you're not careful, squawfish! :)

Generally speaking, I have more confidence in flies with natural tones. Besides working on steelhead, this will also catch trout and if you're not careful, squawfish! :)
Jul 14, 2009
Fly #47: Intruder
Ed Ward came up with an incredible steelhead fly called the Intruder. After the secret got out, it became a very popular pattern. Since it takes a really long time to tie, I made several short cuts with my variation.

While not an official Intruder. It has some of the same qualities. Minimal materials, while still looking bulky.

I've done well with big flies swung deep. Both steelhead and large trout take notice. Big flies catch big fish. One more reason to add this fly to my box.

While not an official Intruder. It has some of the same qualities. Minimal materials, while still looking bulky.

I've done well with big flies swung deep. Both steelhead and large trout take notice. Big flies catch big fish. One more reason to add this fly to my box.
May 14, 2009
Fly #44: Waker 1
I've always been interested to try and make a steelhead rise to a waking fly. For one reason or another, I never made much of an attempt. I decided to tie a few up and give it a shot next time out. It looks like a fantastic way to catch a fish.


Waker 1
Hook: Size 10 Upturned Salmon.
Tip: Silver Tinsel.
Tag: Hot Orange Floss.
Body: Brown Dubbing with Palmered Hackle Tip, Craft Foam.
Wing: Yellow Deer Hair for easy visibility.
Hook: Size 10 Upturned Salmon.
Tip: Silver Tinsel.
Tag: Hot Orange Floss.
Body: Brown Dubbing with Palmered Hackle Tip, Craft Foam.
Wing: Yellow Deer Hair for easy visibility.
Fly #43: Brown Spey
Apr 16, 2009
Fly #42: Yellow Spider
I've been tying a lot of steelhead flies for the last so many months. It has been great fun, but while on the river last time fishing for trout, I realized that I'm running low on some of my "go to" soft hackle patterns.
In response, I've spent the last few evenings tying various trout flies. I've been concentrating on sparsely dressed spider patterns. These are meant to be fished right in the surface film, or just below.

In response, I've spent the last few evenings tying various trout flies. I've been concentrating on sparsely dressed spider patterns. These are meant to be fished right in the surface film, or just below.

Yellow Spider (size 12)
Body: Yellow thread, copper wire ribbing, hares ear dubbing
Collar/Hackle: Natural Partridge, stripped on one side
Body: Yellow thread, copper wire ribbing, hares ear dubbing
Collar/Hackle: Natural Partridge, stripped on one side
Feb 6, 2009
Fly #41: Leadwing Coachman - Steelhead Version
Leadwing Coachman's make great trout patterns. I've used these small winged flies to great success. While tying a few up the other night, I realized that it may make a good steelhead fly. So, with a little adjustment it is now ready for bigger fish.


Leadwing Coachman - Steelhead Version
Tag: Light Golden Brown Floss
Body: Bright Green Peacock Herl with Oval Tinsel Ribbing
Collar: American Speckled Hen Back (brown)
Wing: Duck Quill
Tag: Light Golden Brown Floss
Body: Bright Green Peacock Herl with Oval Tinsel Ribbing
Collar: American Speckled Hen Back (brown)
Wing: Duck Quill
Jan 5, 2009
Fly #40: Blue Marabou Spey
Instead of using the "usual" spey hackles, I opted for marabou. It probably doesn't meet the exact definition of a spey fly, but it is close enough. I'd imagine it will look great in the water. I'll report back when I've found out.
Blue Marabou Spey
Hook: Size 4 Steelhead/Salmon
Tag: Flat Silver Tinsel
Body: Green Floss, Oval Tinsel Rib, Ginger Angora Dubbing
Hackle: Blue Marabou
Collar: Wood Duck Flank
Wing: Bronze Mallard
Hook: Size 4 Steelhead/Salmon
Tag: Flat Silver Tinsel
Body: Green Floss, Oval Tinsel Rib, Ginger Angora Dubbing
Hackle: Blue Marabou
Collar: Wood Duck Flank
Wing: Bronze Mallard
Dec 27, 2008
Fly #39: Earth Tones and Muted Colors
Now that I've been tying larger size 4's, these size 10's are starting to look puny. Regardless of what I think, these flies work! Not only do the trout suck them up, but steelhead around here love them too.

Basically, this fly is a miniature version of the larger spey flies. Only with very muted colors. Trout absolutely dig these when swung in the current, and steelhead will grab them too.
Subscribe to:
Posts (Atom)












