Showing posts with label intruder. Show all posts
Showing posts with label intruder. Show all posts

May 9, 2011

Squidro

Haven't been fishing, nor have I tied a fly in eons. However, I did stop by Leland to pick up one of Scott Howell's "Squidro" flies. I wanted one to reverse engineer it- since it looked like a good idea.

The fly is basically an intruder. But, instead of using rhea or ostrich, it uses rubber legs! Easier to tie and more durable. I can't wait to give it a try (both in the river and on the vise). The below picture is from Leland's website and the version I picked up.



It was an expensive fly, $6.50 after tax! I'll mass produce it and variations for my own fly box, so I guess it will be money well spent. :)

Jan 1, 2010

Losing Intruders

Normally I don't blink when I lose a fly. However, when it takes 45 minutes or more to tie one, it can be disappointing. Especially after only 10 minutes of using it.

This was the first "true" Intruder that I tied. Put on a shank with the mono loop at the back end so you can string the tippet through. Ala a tube fly. The way that Ed Ward originally tied them (if Skagit Master is any indication, he uses tubes these days).

The 5 inch fly looked awesome in the water with its flowing ostrich plumes. I made the mistake of using a lighter tippet than I should of for its weight. On one of my casts I blew the anchor and it blasted the knot. Off she went into the depths.

I'll tie another soon. This time I'll take a picture of it.

Nov 20, 2009

Scandi vs Skagit

Common thought is that Skagit lines are what you should use when flinging sink tips and heavy flies. Unfortunately, over a typical day, I switch back and forth between fly sizes and tips so often, that going between a skagit and scandi is too much of a headache. (Yeah, I know, you can use a skagit line with a floating tip and small flies, but I prefer a more delicate presentation.) So, for those seasons that are not Winter, I'll probably be sticking with my compact scandi now.

Reason is, I performed a little test yesterday. I took a 120 grain versileader and put it on my 420 grain compact scandi. To the end of the tippet, I attached a 3" barbell intruder. On the first cast, I was ready for the fly to go absolutely no where. To my surprise it casted very nicely. The line laid over straight and I was able to hit 70-80 feet with no problems shortly thereafter.

Now I'm wondering what the max tip grain weight is that I can put at the end of that setup. We'll have to find out the answer another day. For now, I'm happy with these results. Now I know I can put on a heavy fly and decent sized sink tip on the scandi and expect it to work.

I won't be giving up on the skagit. For those days that I know I'll be using nothing but heavy tips, I'll put the skagit on and leave it on.

American River

As mentioned in an earlier post, I've decided to try and make my reports more helpful. Now, when I say more helpful, I really mean more helpful for me. This blog was originally intended as a journal I could return to, so that I could remember what happened and where. Problem is, after re-reading a few previous reports, I've found they aren't very helpful at all! Woops.

Access Paradise Beach, William H. Pond
Air Temp Low 38, High 64
Water Temp ~56 F
Flow ~1900 cfs
Time in/out 7:30am, 5:30pm
Leaders/Lines Compact Scandi

3.9 ips sink leader Morning

7.0 ips sink leader Afternoon

Intermediate sink leader Evening

12 lb FC tippet
Flies Various soft hackles 0 fish

3” black intruder w/ dumbell eyes 2 half pounders, 15-18 inch

2" bead head black rabbit strip leech nips/plucks

Size 8 blue steelhead spider 1 half pounder

Various hairwing steelhead nips/plucks only


Arrived late due to the car accident mentioned in a previous post. Started at Paradise Beach and worked the area most of the day. Went to William H. Pond in later afternoon. Never before at this spot, had trouble finding good water. Next time, will park closer to foot bridge and work that side.

Later in the morning, I decided to try something I hadn't done before. Put a heavy and good sized fly (3” intruder with dumb bell eyes) with 120 grain leader/tip on the end of my 420 gr compact scandi line. Had always used a skagit line for something of this weight. Guess what? It casted as well, if not better than the skagit line. Much to my surprise, 70-85 foot casts were not a problem with great turnover. Next time out, I'm going to try 10 feet of T10. At 100 grains, it will be a slightly lighter tip, but grains will be spread out differently. Want to see how smoothly it goes. If successful, I'll keep upping the grain weight to see exactly where it all falls apart.

Overall, this was a decent day on the water. I was a little frazzled from the excitement that took place in the morning. Won't be fishing next week because of Thanksgiving. Hope everyone has a good Holiday.

Jul 14, 2009

Fly #47: Intruder

Ed Ward came up with an incredible steelhead fly called the Intruder. After the secret got out, it became a very popular pattern. Since it takes a really long time to tie, I made several short cuts with my variation.



While not an official Intruder. It has some of the same qualities. Minimal materials, while still looking bulky.



I've done well with big flies swung deep. Both steelhead and large trout take notice. Big flies catch big fish. One more reason to add this fly to my box.