Showing posts with label switch rods. Show all posts
Showing posts with label switch rods. Show all posts

Jun 6, 2008

Rod and line testing results

It was nice to get on the water again, even if it was only for a couple of hours. The nearby lake is stocked full of trout, but the real reason for visiting was to try out the switch rod and AFS spey line.

The RIO AFS Outbound has a 37' head with the real loading at the back of the section. The long taper to the front is a lengthy 29'. At the point where the running line starts, the line turns from green to black. A nice easy way to see where the loading point is for the line when spey casting.

The combination worked well. Even if I think the rod could of used a slightly heavier line. This particular AFS was 300 grains. I think something closer to 400 would of done the trick. However, with this weight, I could easily 1-hand overhead cast without any fatigue. This is perfect. One could continue to overhead when they have the room, or zip out line in a spey cast when tight conditions persist or take advantage of what makes this type of casting so special. Less time false casting, and more time fishing.

I was able to easily overhead with 10-20 feet of line out of the rod, the whole head, or anywhere in between. No problem. Shooting line was a breeze and if the head was nearly or completely out of the rod, line would rocket off the tip. The only thing to be aware of, is that you have to slow down a little bit if you are used to 8 or 9 foot rods. This almost 11 footer needs a little extra time.

Spey casting was easy too. It took me a little playing around to figure out where to place my D-loop anchor. However, after experimentation, I could spey cast 70 feet without much difficulty. After a little more time with this combination, I'm sure I could hit 100 feet without problem. The head also allows me to spey short distances too. Something I was a little curious about because of the long taper this line has. In fact, with that 10' RIO versileader on the front, I could cast just the leader and a short bit of line no problem.

Next week will be a trip to the American for some Shad fishing. Hopefully I'll catch some fish and can report on how it performed in that area.

Jun 4, 2008

Finally, a morning on the water

Work has been really busy. I haven't had a chance to go fishing in quite a while. Tomorrow morning, I'll have an opportunity to sneak out for a few hours to a nearby lake.

The real reason to go is not even to catch fish (although that would be nice), but to finally try out that switch rod with the proper line on it. A fresh AFS Outbound and some RIO 10' versileaders await. I'll report back on how the rod/line combination performed.

If everything checks out okay, I'll be slipping away next week for some Shad on the American.

Apr 24, 2008

Spey O Rama!

Last Friday I went into San Francisco for the "Spey O Rama". It was held at the Golden Gate Fly Casting Club. First of all, this club's facility is amazing. There are three large casting pools, a lodge, and plenty of friendly members.


As a single hand fly fisher, why did I go to a spey casting event? Well, first off, I'm using quite a bit of spey casting techniques in my single handed fishing. Second, I'm considering a jump into switch rods. There were several vendors and custom rod builders at the event. I had ample opportunity to test a bunch of them out and see if it was something I wanted to invest in.

I tried out a Meiser, a Beulah, a CND, and a GLoomis. My favorite was the Meiser. That should be no surprise, they are pretty much considered the gold standard in switch rods. Within a few minutes of casting this 10'8" rod, I was throwing casts past 70 feet. I could of gone much further too, if it weren't for the trees/bushes at the end of this particular casting pool. The Beulah would be my second choice. Although I wasn't able to cast it as far, I think it was mainly due to the line that was on.

The problem with the rods and the particular lines they had on them, is that they were difficult to overhand cast. Even two handed overhead. I'm sure if I explained to the vendors what I wanted to do, they could match a rod and line up for me that would work. However, one shouldn't expect a switch rod to cast as well one handed as your average fly rod.

So will I be buying a switch soon? Well, not exactly. The plan is to buy a blank and build one. It's not as difficult as it sounds. More on that later.

Mar 7, 2008

Two Handed Rods

Not too long ago, I bought a new Redington 8-weight rod. While shopping at my local fly fishing shop, I quickly realized that this weight came with a "fighting grip". Initially, I resisted the idea of an extra stub on the butt end of the stick, it just looked odd. Lucky for me, I purchased it anyway.

As mentioned briefly in my Calaveras report, I've become somewhat obsessed with spey casting techniques. Although you can certainly do all of these casts using a one handed flyrod (which I certainly do), I've found that I can more easily get the line out longer distances by taking my left hand and using that fighting grip for extra leverage. Just as you would on a spey rod.

If I had realized the value of the extra grip prior to buying a rod, I probably would of bought a "switch rod" instead. For those of you not familiar with this hybrid, it is a cross between the flyrod and a spey. It includes a grip for your second hand and they are usually longer, ten feet or more. The extra length and the grip give you the ability to load your line more and really get it out there without the need for a back cast.

Many of the rivers that I fish have a lot of trees and brush along the bank. Learning how to cast with these techniques have been a blessing, not to mention feeling more graceful than simply performing a roll cast. With that fighting grip and what I've learned over a few trips out, I can get line out pretty darn far without worrying about what is behind me.