Jul 14, 2009

Fly #47: Intruder

Ed Ward came up with an incredible steelhead fly called the Intruder. After the secret got out, it became a very popular pattern. Since it takes a really long time to tie, I made several short cuts with my variation.



While not an official Intruder. It has some of the same qualities. Minimal materials, while still looking bulky.



I've done well with big flies swung deep. Both steelhead and large trout take notice. Big flies catch big fish. One more reason to add this fly to my box.

Jul 13, 2009

Report: Truckee

Last week I was able to hit up the Truckee River. This is a great piece of water, I wish I had more of an opportunity to visit.

Knowing my fishing time is limited this summer, I wanted to make sure I was there bright and early. Leaving the house at 2am put me riverside just before the sun came up. I strung up my switch rod with barely enough light to see.

Carefully, I waded out and fished a long riffle just off Hwy 80. After about 15 minutes, I landed my first fish on a size 10 Prince Nymph. These flies are hot. I tie mine with a soft hackle up front in various sizes, some with beads and others without. For some reason, the fish have been excited to see them all year. If I remember correctly, I was fishing a soft hackle of some sort as my second fly on a 10ft intermediate sinking poly leader.

It was still before 7am, and I thought this was going to be a good day. I continued down stream and explored some spots I haven't been before. A few hours later, I headed back to the truck for a water refill.

After a big old drink, I scrambled down some rocks and scurried along a hillside filled with boulders the size of car tires. It was slow going. Eventually I found a spot and after a few swings, I caught my second fish. This guy was small and aggressive.

It was time to move on, I loaded up and went down the highway to the next exit and hit some spots that looked good on satellite maps. By now, the wind was whipping at least 20mph. The day was getting warmer and I decided to put on a heavier sink tip and bigger fly. I was trying to get lower in the water column to where I thought the fish were holding. A few hours went be with nothing to show for it.

I found a nice spot with deep water. I decided to put on 12ft of T10 and a 4 inch bunny leech. My switch rod didn't handle the tip and the heavy water logged fly as well as the spey. But I kept at it. Eventually, I had a nice fight with a rather large fish that lasted a whole 15 seconds before he came off. After spending another 1/2 hour trying to get him or one of his friends, I gave up and moved on.

I went back upriver to explore some more new locations. There was some white water pouring into a deep pool. This looked like a good place for fish. Unfortunately, I couldn't get anyone to bite. It was rather difficult casting. No wading whatsoever available and with trees right behind you, it was impossible to form any sort of d-loop to get the fly very far. Moving downstream yielded more wading possibilities, and the water looked excellent. However, no one was interested.

I moved upstream to a place I've been before and it was more of the same. I caught a few smaller fish, but nothing to write home about. It was getting late in the day and I needed more water. After climbing back up to the vehicle, I decided to go elsewhere instead of going back down to the river. I drove somewhere off Glenshire Blvd for my last hooray of the day.

The wind never did calm down. It was still swirling almost non-stop. Combine that with a long day and I started getting sloppy. I formed an upstream d-loop, instead of a downstream and when launching the cast forward, the fly nailed me in the forearm.

It stung. A red hot shooting pain told me the fly was in my arm deeply. After an inspection, I was right. The fly was embedded into the underside of my forearm- all the way to the hook bend. It was deep and very painful. I tried to pull it out, but my skin just stretched. I knew I had to yank it. And although the fly had no barb, the spot where the barb once existed was rather large and made for tough removal. I held my breath and yanked it out. The blood started flowing and I stood there wondering what sort of negative side effects I was going to have. I raised my arm above my head and put pressure on the hole until the blood clotted. The area was discolored and I wasn't sure if it was a big deal or not. I decided to keep fishing and take my chances. (No lasting effects. Some bruising and a couple of holes are it)

I caught a few more fish that evening in various pools/riffles. But I couldn't stop thinking about that hook and it made me apprehensive on every cast.

Just before nightfall I returned to the car and went home. I took a shower and was in bed a little over 24 hours from when I first left.

Jul 6, 2009

Mike Kinney Casting

This is a simple video of guide Mike Kinney casting his two hander. Mike is really well known in the steelhead world and is a nice video to watch if you are interested in two handed skagit casting.



Like Ed Ward (see next video), they have slow and smooth casting strokes.

Skagit Master

Ed Ward is one of the Skagit founders. Although I've never met the man, I've exchanged emails with him and he truly is a knowledgeable fisherman. Not only is he the "Skagit Master", he knows how to catch fish. I originally heard his name along with the famous fly he introduced to everyone. The "intruder" is well known to steelheaders. I hear he is currently using a more modest fly, simply a rabbit strip and a hook. Whatever he puts in the water, he catches fish. He is the man.

In a month or two, he will be featured in a DVD called appropriately enough, "Skagit Master". This is definitely something that will be in my player. And that is saying a lot, since I don't make a habbit of collecting fishing/casting videos. Here is the trailer for this film.



Visit youTube to see this in HD!

Jul 5, 2009

Surf Perch?

I made my first attempt at fly fishing in the ocean. Only spent a couple of hours while my wife and son played in the sand. I got a bump or two, but nothing more. It was more a chance to figure out what the heck I was doing. I really had no clue.



In an unusual twist, I actually have video! Since my wife was around with a camera, you can see a few seconds of me casting my switch rod over head. The two handed rod worked surprisingly well, I was able to cast pretty far over the breakers through a wicked wind blowing in my face. Even with the 10 foot sink tip.

If it weren't for the wind knots, it was a killer day. I'd like to go again soon.

Jun 17, 2009

Trip Report: Yuba

For this first time in I don't know how long, I went fishing on a Sunday. I normally avoid the weekends due to crowds. However, considering my workload, I didn't have a choice.

Surprisingly enough, my trip to the Yuba, above and below the 20 bridge, was relatively uncrowded. I did see other fisherman, but had no problem finding empty spots.

I'm going to wrap up this report quickly as I need to get back to work. The day was warm and the wind was acceptable for a change. I ended up catching 3 fish. None of them were over 15 inches. One was caught in deep water while high sticking my spey rod (yeah, I know, not the best use of a spey rod) around some rocks, right near the shore. If I remember correctly, he took a size 12 bead head prince nymph. About an hour later, I caught a 15 inch fiesty trout on the swing in some heavy riffles. This guy was caught on a size 10 partridge and orange soft hackle. The last fish was caught late in the evening on a small generic steelhead fly.

Started the day off with a 420 grain skagit line and 8feet of T-10 sink tip. I worked a run above the hwy 20 bridge pretty thoroughly for nothing. At some point, around noon, I switched to a 420 grain scandi line with a 15 foot floating leader and tried skating some flies. No takers.

I kept the scandi line on and switched to a 10 ft 3.6ips polyleader. This was kept on for almost the rest of the day. This is what I had on while catching those three fish. Late in the day I moved to a clear 10ft 1.5ips polyleader. Nothing with that one.

It was a good time. Especially appreciated because I'm not able to get out much to the river lately. Fingers are crossed for another opportunity soon.

Flow around 2,000
Water temp approximately 50 degrees.

Jun 5, 2009

Underwater fly fishing?

Because of a brutal work schedule, I'm not able to do much fishing these days. The only thing I seem to be able to do is live through others experiences.



I found this video on the net. Wow- how excited would this be? Amazing.

May 27, 2009

Fly #46: Sunset Blue Waker

This is one of my favorite waking flies so far. After giving it a test drive, I'll let you know how it performs.

May 20, 2009

Trip Report: American (Shad)

I've always wanted to try fishing for Shad, but I've never taken the plunge. On Monday evening, I took up an offer to be shown where to go on the American for these feisty fish.

We weren't to meet until 6pm, so I arrived a little early around 3:30 for some potential half pounder action. The temp was in the high 90's and thank goodness for leaky waders, cause I was pretty miserable. I waded and walked down some riffles and pools, but didn't get anything more than a bite. So much for steelhead.

I met Aaron a little after six and we walked for a few minutes upriver. He knew exactly where to go. Aaron started flicking out his jig (he wasn't using a fly rod) trying to locate the fish. I watched for a few casts and then started trying to get my line out there. We were in a section without much current, and frankly, I was struggling. I couldn't get the fly out very far and without the current swinging the line downriver, it was awkward at best.

Aaron didn't have the same problem and it wasn't long before he caught his first fish. He offered to give up his spot and I stepped in and didn't have any luck. Aaron seemed to catch fish wherever he was, so I knew they were there, I just couldn't get 'em.

I'm not sure how much time went by, but we moved downstream. Eventually and smartly I took off the longer scandi line and put on the short compact skagit with a 10 foot sinking leader. This allowed me to strip in further each time. We were now in a place with more current and swinging was possible.

Aaron needed to take off, and before he left, he gave me the jig that he was using. I thought I'd try it. My shad flies didn't seem to be working (upon further review, I think it was the presentation, not the fly) anyway.

Not more than a few minutes later, I was getting casts out 60-70 feet. Flicking it slightly upstream, I'd let it sink for a bit then twitch the rod here and there, followed by a strip. I finally got a bump! The next cast, I caught my first shad. He wasn't real big (maybe 15 inches), but inch for inch, he gave up a decent fight.

It was getting late and I was just now discovering a method that worked. Too bad it took me until then to figure it out! By dark, I caught 3 shad and hooked a bunch more. Whatever I was doing - worked. I'll be back to try again. Thanks Aaron!

May 18, 2009

Fly #45: Waker 2

Here's another waker that I tied a few days back. This one is on a size 8 hook and although I don't know how it looks in the water yet, I'm sure it will make quite the disturbance.

Waker 2

Tail: Squirrel tail.
Body: Brown and gold dubbing with palmered hackle tips.
Head: Red Buck Tail.

May 14, 2009

Fly #44: Waker 1

I've always been interested to try and make a steelhead rise to a waking fly. For one reason or another, I never made much of an attempt. I decided to tie a few up and give it a shot next time out. It looks like a fantastic way to catch a fish.


Waker 1

Hook: Size 10 Upturned Salmon.
Tip: Silver Tinsel.
Tag: Hot Orange Floss.
Body: Brown Dubbing with Palmered Hackle Tip, Craft Foam.
Wing: Yellow Deer Hair for easy visibility.

Fly #43: Brown Spey

A fly similar to this produced on the Feather the other day, so I decided to tie another up.


Brown Spey

Body: Angora dubbing, black schlappen palmered, oval tinsel rib
Collar: Guinea feather behind wing and hackle tip in front
Wing: Mallard
Tag: Oval Tinsel


May 10, 2009

Trip Report: Feather River

A week or two ago, I became the proud owner of a new spey rod. Instead of building another, I decided to simply purchase a 6-weight. Ever since, I've been itching to try it out somewhere other than the casting pool. The original plan called for a trip to the Yuba. However, the flows were much too high and I figured this would be an excellent opportunity to visit the Feather.

I've never been here before, so I went through my usual intelligence gathering. Satellite maps, flow reports, fishing reports, and contacting some people that have been there. It was decided to try the area between the hatchery and Palm Ave.

At early morning, pre-dark, I entered through one of the many gates to the wildlife off Larkin. The road was nothing more than gravel and rock. Pretty darn bumpy and rough. A maze of unmarked trails made for some navigation problems. However, my first stop was pretty easy to find.

This river is big! The sat maps don't do it justice. Even with my two hander, there was no way I could cast across the whole thing. So, I concentrated on what I could reach. Started with just the leader out of the tip and swung a generic soft hackle with a larger size 4 steelhead fly with black flowing spey hackles. Both were attached to a couple of feet of mono and then a 7ips sinking leader.

Didn't see any signs of life, but the river looked fishy enough. I slowly inched out more line on each cast. Eventually, I was casting out 60 or so feet, swinging it down, letting it hang, followed by a few steps down the river. This went on for a while. No bumps, no bites. Nothing. Birds were out, diving into the river for what I assumed were fish. So I kept at it until the river got too deep to comfortably wade.

Not long after, I chose to crawl up the bank and back into the car. The road was easy to follow since I could just hug the river, but it required slow-going. After spotting another fishy looking spot, I started swinging again. By this time, the wind was whipping along at 15 or more mph. I'm not sure what it is, but anytime I plan for a day on the river, it gets windy. Today was no exception.

After a few wind knots, I had the line swinging 60-70 feet out. There were no boulders or any other targets to aim for. It was a wide open search and destroy mission. I prefer targeting fish holding spots, but these larger rivers make it difficult at times. As usual, I tried to position myself so that my downstream dangle was on a current seam. Just in case someone was lurking on the slow side waiting for food to flow down the fast side.

About 10 minutes and 50 tangles later (lots of debris in the water), I felt a bump in the heart of the swing. I resisted the urge to set the hook and just let the fly swing further. Just as the fly came to the end of the swing-- WHAM, the fish hit a second time. He followed the fly a pretty good distance, at least 30 feet. The line went tight and the fish took off for the middle of the river.

This was the first time catching a fish on this rod, so I wasn't familiar with how it would feel. But it felt like a big fish. He wasn't peeling line off, however, at 65 feet out, it was rather challenging to maneuver him back to the slower water.

This is the fly that caught the first fish of the day.

At some point I caught a glimpse and noticed he was pretty good size. A few minutes later I had him to hand and put him up to my rod for a measurement. Earlier, before leaving home, I measured from the butt of my second grip to the top of my first. It is 23 inches. This hatchery fish stretched slightly beyond. I'd guess he was 24-25 inches and bulky. He took the size 4 spey fly and after removing it, I set him free. It was only 9am, and this would be the last bite I'd have until the afternoon.

It is a blur to me now, but at some point I got back in the car and drove further upstream. The road got worse and it became harder to figure out which direction to go. Not one, but two and a half HOURS later I was fishing again. I did a lot of really slow driving trying to find a place to fish. Nada.

I decided to check out the fish hatchery up near the dam. What a fish-ladder. If you haven't been here before, you've got to check that thing out. It is quite the run. Someday I'm going to come back here with my wife and son, we'll check out the rearing ponds and the underwater viewing area. I was too eager to start fishing again to bother today.

I drove more and more. Good thing I laid out a ton of potential fishing spots mapped out the night before. Those roads in the wildlife area are a major time waster. Next time, I'll go in and out of a few gates, but not drive through the area any further than I have too. It is just too time consuming. Unless you have a beater of a car, it pays to drive a little slower to avoid the dents (some sections of bigger looser stone requires 4wd and a high clearance, be careful if you have a 2wd car).

Eventually I found a spot to fish again. It had been so slow, that I looked for deeper, slower water. I even put on an absolutely huge split shot on and two heavy flies to get down. It didn't help. No bites.

I wandered downstream to this really neat little spot. It was very hard to get to, and you had to balance carefully on these rocks, but the water looked so fishy. I spent quite a bit of time here with no results. Even though fish were starting to rise for bugs, I couldn't fool anyone. Out of casting range, I saw an absolutely huge trout jump out of the water. It was quite the sight to behold. If it weren't so windy, I'd be able to target the rising fish more easily.

I decided to go back to the car for some food. It was probably 3pm by now. After the long walk up a steep hill, I chose to get in and drive somewhere else instead of walk back to the river to a spot that wasn't producing. Besides, this was a day for exploring anyway.

I found this island that looked absolutely incredible. Such a great place to fish. Unfortunately, I couldn't get out to it. Not that I didn't try. There was this narrow strip deep water keeping me from crossing. I was very disappointed. If the water was slightly lower, I could of made it.

Discouraged, I walked downstream to end of that island. When the two forks joined again, there was a swirl of current. Far out into the river, the two swirls met and made this great back eddy. The water just seemed to stop here. I was thinking that this had to hold fish. How can I get to it? Sure enough, a few minutes later I saw fish rising. I tried different angles and casting to various drifts to try and get into the slow water. But the current on either side was pulling my fly out.

The answer was to wade a little further upriver and cast at a very awkward angle, down and across. I had to put out 70-90 feet of line to get to it. On that very first successful cast, where my fly just sat in the slow water-- WHAM! I scrambled back out of the current to slower water where I could bring the fish in. This guy measured about 22 inches. He put up a good fight.

I worked this eddy for a while. There was a 45 minute or so window when they were hitting on almost every cast. There was also something very big lurking in there. Or maybe several big ones. I lost two flies tied on 8lb mono and had the hook straightened on not one or two, not three, but four flies. The hits were so hard, it was alarming.

A few minutes later, I cast my fly out about 60 feet, lifting the line high out of the water trying to keep it from getting swept in the faster current, the fly swung almost in a dead drift as I fed running line in to keep it drifting beyond 90 feet. Smack! Hit again. But this time, the hook didn't bend, he was staying on.

Instead of running away from me, he came flying towards me. I stripped in line as fast as I could to try and keep it tight. Before you knew it, I had about 50-60 feet of running line under my feet. This was not good. It was a big fish and I wanted to use the reel. I reeled in the slack, but it got so bunched up from being loose, that my reel got jammed with line tangles. Somehow I kept the line tight and untangled the running line from my reel at the same time. I carefully waded over to the slack water.

I worked the fish to my hand that was in the water waiting for him. A tailed him, but when I tried to pick him up, my hands were so shakey. I've never been like that before, I was physically shaking from the adrenaline. I couldn't keep a grip on him. Maybe he felt my moment of weakness and had another spurt of energy. He took off between my legs. Sure enough, he had looped the tippet around my boot and the line broke. Buh bye. :( If I were to guess, he was upper 20's. But, it was hard to say for sure. At least mid 20's. Whatever size he was, the excitement gave me the shakes and he got the better of me. Good for him.

This section was very productive. Over the course of an hour or two, I caught 5 fish. None of them were under 20 inches. I lost several more and had some really big grabs. Still, I decided to move on before it got dark.

Further downstream, I found another good looking spot, but didn't have any luck. Between it getting dark and the swarm of mosquitoes that were attacking me, it was time to go.

This was a unique experience. It is the only time I can recall that I caught this many fish and not one was under 20 inches in length. Normally, I'd get a few small guys. Happily, I'd take that next time out.

May 7, 2009

Steelhead "Summer" Box #1

Just for grins, I took a picture of my go-to steelhead fly box. These are all the low-water and summer flies. You can see several that I've posted pictures of on the blog and a few that haven't made an appearance.

Summer Steel (Click for a larger picture)

At a later time, I'll post my winter box. The big ugly and heavy ones.

May 3, 2009

Lining Rods

Spent a couple of hours at the casting pools to try and dial in some new lines on a couple of rods. First off, I've had much too light of a line on my main weapon of choice. While I could overhand it nicely, it just wasn't heavy enough to pound out some longer casts with a some sort of water borne anchor cast. I felt that 65-70 was pretty much maxing it out. With my skill level anyway.

Today, with a heavier line, I could get out further. 70-75 feet wasn't a problem, even though I wasn't standing in the water (an important note considering these are spey casts afterall) .

Now, when I tried a few lines on a longer 12'6" rod, ziiing. I was hitting 90feet without much difficulty. Again, standing out of the water. When the temps warm up later this week, I'll get my feet wet and see what happens. In that scenario, I'm hopeful that I can hit 100 feet.

Ninety Nine percent of the time, I don't need to cast anywhere near that distance. However, on those occasions that I do, it is nice to be prepared. This fall, I'll be up in Washington for a steelhead trip. I want to be comfortable bombing out 80-100 foot casts if possible.