Yuba Report

These long Summer days can really take a toll. Beyond the time I spend on the water, from sun up to sun down, I have a pretty good commute to the water. We are talking almost 20+ hours from when I leave my driveway and when I get back. It can be a real drag.

Last week, I had -what lately is a rare opportunity- to go fishing. The Lower Yuba was my choice. The reports were for high water flow and lousy fishing. A perfect combination! One of the purposes of going was to dial in my rod/line combination for an upcoming North Umpqua trip. Actually catching fish would of been nice, but not my ultimate goal for the day.

The water was unusually cold. Despite the hot 100+ degree air temp, it wasn't bad at all. My setup was a floating line/leader with unweighted flies. Exactly what I'll be using up in Oregon. I'm not used to casting a 15+ foot leader, so this was a good chance to get myself re-acquainted.

Started the morning above the bridge with a size 4 generic steelhead fly. Managed a few hookups that didn't last very long. The fish were in there, but most of the ones that were willing to play, were small. Under 15 inches. I continued stepping downstream to try and find a player. Hopefully someone bigger.

Access	Hwy 20
Air Temp	Low 61, High 100+
Water Temp/Visibility	~49 F / 8-10 feet
Weather	Sunny
Flow	3,500+ cfs
Time in/out	5:30am, 8:30pm
Leaders/Lines	Compact Scandi
	15ft poly floater	Morning
	15ft mono leader	Afternoon on
	8lb Mono tippet
Flies	Various sz 4-8 steelhead	some tugs
	Sz12 red soft hackle	8+

I noticed early on that the rocks were super-slippery today. Even with my studded boots and fancy rubber soles, it was treacherous. Funny enough, the North Umpqua is known to be a very slippery place too. Perhaps someone was trying to get me prepared in more ways than one!

The rocks in this particular run were bowling ball sized and super smooth. Covered in some sort of goop, it wasn't a good idea to step on top of them if you could help it. The water was waist deep when I stumbled and planted my foot on the top of one. Exactly what I didn't want to do. Down I went! I floated only a few feet before I regained my foot hold and stood up. But it was too late. Water had gone over my wader tops and I was now feeling the 50 something degree water filtering down to my legs. Brrrrr! This is the first time ever I've taken a dunk and had water go over my wader top. I guess I should consider myself lucky to have lasted this long.

It was still early morning. And even though the day would soon top 100 degrees, it was now very cold. I pressed on for another hour or so trying to catch a huge fish that was surfacing right in front of my eyes. But, eventually, I had to go back to the car to change. Too much shivering.

After drying up, I went back to the water. But this time below the bridge. No fish. Not even a bite. The water is a little high here and the fish-able spots were a little tough to get to. After an hour or so, I decided to go back above the bridge. I walked much further upstream before getting back to it. This is when the fun began.

At some point, I put on a single size 12 soft hackle. I'll try to post a picture sometime. It is bright red body. I'm not sure I have ever used this fly before. But, it just looked like a good one. Literally on the first cast, I had a small 12 inch fish on. Finally, the first fish of the day. I caught a few of his friends further down the river too. This fly was hot!

The window of time where I was catching fish started to close. I took this opportunity to go back downstream to where I got my dunking. I wanted that big fish that I saw earlier. He must of been in the upper 20's. And he was fat! As I approached that section, two other fly fisherman stepped in below me. Argh! No respect. Typically BS I see around here.

Instead of causing a scene, I chose to go back to the car for water and food. It was now late afternoon/early evening. After filling my stomach, I didn't really want to huck it back upriver, so instead I went down.

I still had that small red soft hackle on and nothing else. No two or three fly rigs today. Keeping it simple. The leader was a hand tied 15 footer. Perfect size for my 12'6" two hander and compact scandi line. It was casting amazingly well. Normally I use poly leaders, but I had an itch to do it the old fashioned way. I was pleasantly surprised at how well it was casting big and small flies alike. I may be tossing my poly's aside for floating work.

I'll skip the details, but the rest of the evening went great. I caught two 20 something inch fish almost on back to back casts. They both fought hard and provided several minutes of entertainment. The one even took a run and peeled off some line. Before it got dark, I ended up getting a dozen hard tugs and a few more fish to hand. What a way to end the day.

What started off as a chance to dial in my rod, ended up being a great day of fishing. Good thing I didn't let those bad fishing reports and high flow complaints scare me off.

Slicing and Dicing

Wow. This had to set the record for my longest blog post in the making. I set out to write this months ago, but one thing led to another and it just didn't get done. Until now! Yay!

If you've spent any time with two-handers, you'll quickly see that there is a large contingent of people out there that like to slice and dice lines. Trying to come up with that perfect setup- to improve their casting. From the outside, it seems like a fun thing to do. However, the last thing I need is another hobby to take up more time that I don't have. So, for now, I'll live vicariously through the people that do. And any knowledge they share, I can use when picking off-the-shelf lines.

The problem with off-the-shelf lines are that you pretty much pick a line type (i.e. skagit, scandi, etc) and then a grain weight to match your rod. That is about as customizable as it gets. Well, at least that is what I thought. Keep reading to see how I was wrong with that conclusion.


Back to people cutting up their lines. While perusing Speypages, I eventually came across Steve Godshall's name. People seemed to invoke his name whenever an expert opinion was needed on lines. So when I was browsing Meiser's website and saw that Steve builds a Scandi line for Bob, and not much longer, learned that my friend was using one (and got a chance to cast it)- I became curious to know more.

Steve lives up in the Rogue Valley and has been fly fishing for more than a decade. As a rod builder he had a chance to learn a lot about rods and how unique each one is. In fact, he came up with something he calls "blue printing". It is a system to quantify rod casting quality. This has become part of the prototype process for new rod designs from Gary Anderson, Bob Meiser, and of course Steve himself.

At this point, Steve realized that the rod is only part of the equation. So, he turned his focus to lines.

A couple of years ago, Gary Anderson started including a line with every spey rod he built and sold. Because clients were making poor line choices, he wanted to get them off to a great start. Steve was asked to develop a Scandi head to fit a couple dozen of his rod models. Also working with Bob Meiser, Steve further developed a base Scandi head to something that he could offer to his clients as well. (Meiser sells them as "SGS" and Anderson as "Steel Heads".)

Here's how it works. And this is the cool part. From 9 base line sizes, Steve can produce 100 lines for 100 different rods. And to get even more of what you are looking for, if Steve is available and if you are in the neighborhood anyway, maybe you can go to the river and cast a handful of lines. From that, Steve will write you a custom line prescription. Just like a doctor. But less painful.

Besides the Scandi lines, Steve also has a Skagit. Although, according to Steve, he looks at casting styles as the difference between skagit and scandi. Not so much the line themselves, because both are basically shooting head systems. As someone who casts both lighter scandi and heavier skagit lines with the same sustained anchor casting, I'd go along with that.

I know what you're thinking. What's up with the advertisement? Just to be upfront, I'm not getting paid for this or getting any freebies. I just think what Steve is doing is pretty slick. I mean, you aren't going to find this sort of custom stuff from the big manufacturers. Don't know about you, but I haven't the time to figure all this out on my own.

The whole reason for writing this to begin with is really because of his "Skandit" lines Steve builds for Meiser. This is what got me excited about what he is doing. The Skandit system is a multi tip short shooting head with a floater and 4 sinking "zink" tips. He doesn't stock the system on a shelf. It is built for each caster because, as Steve says, “the magic is in the match”. The idea is, put on the floater and you have yourself a power Scandi line. Put on the zink tips, and you have yourself a light Skagit. Nifty.

Maybe sometime in the near future I'll pick up one of his lines and report back to you on my feelings and how it compares to my current skandi and skagit lines.

Happy 4th

Happy fourth of July weekend. I hope everyone is getting more fishing in than I am!!

My current project is about to end. So, I'm hoping to get a day in before the end of the month. And... drum roll please... In early August, I'll be spending two days on the North Umpqua for Summer Steelhead. I can't wait. More later.