Dec 12, 2009

Skunked on the American

I figured that fishing on a cloudy day would improve my chances. Unfortunately, that wasn't the case. I don't believe I had one solid pull the entire day. I tried to make the most of the day by just appreciating the outdoors. However, catching something would of been nice.

Starting out at Paradise Beach, I fished for several hours using 8 feet of T10 and an intruder style fly. I worked several runs and even tried a new spot or two that I missed last time. After I felt I'd had enough punishment, I went to Gristmill and spent a little more time of casting practice. I didn't waste as much time here and moved over to River Bend Park hoping a fish would feel sorry for me.

Access Paradise Beach, Gristmill, River Bend Park
Air Temp Low 31, High 52
Water Temp/Visibility ~49 F / 4-6 feet
Weather Cloudy w/ light drizzle
Flow ~2000 cfs
Time in/out 6:45am, 5:15pm
Leaders/Lines Compact Scandi

8ft of T10 Morning

11ft of T10 Afternoon

Int Poly Leader Evening

7 & 12 lb FC tippet
Flies Various Soft Hackles 0

3” black intruder w/ dumbell eyes 0

Sz8 steelhead blue spider 0

Various steelhead patterns 0



After scouting out some areas I saw on the satellite maps, I eventually ended up by the footbridge daydreaming as the rain began to fall. The day had ended and all I had to show for it were a few lost flies. Ahh, the fun of steelheading.

As you may recall from a previous post, I was curious what would happen if I put a sinktip on my compact scandi. Well, I now have the answer. There were no problems whatsoever and the line could easily turn over 11ft of T10 with a heavy 3" fly on the end. At this rate, I'm not sure if there is a need to even use a skagit line with the tips and flies I commonly use.

Dec 5, 2009

Weather Report

Here in Northern California, we are expected to get heavy rains starting on Monday. If you believe the forecasts, it will last for almost a week with a few breaks here and there.

This is of course good news for the steelhead. Hopefully it will move a few fish up into the various systems. Watch the water levels, and if you can somehow hit it when levels are falling again, make sure you go. A good source for information is here.

Dec 3, 2009

Klamath Report

Earlier this week, I traveled about 5 hours north for a day trip to the Klamath. I've never been before, but have heard good reports. Figured it was worth the drive to find out.

Also worth noting, I actually fished with someone else for a change. Ted and I met early in the morning somewhere near Hwy 5. It was a brisk day, with morning temps in the 20's. Stupid me forgot a hat, luckily it wasn't windy and although a bit nippy, it wasn't all that bad.

We suited up and got into the cold river. We were both swinging flies with our two handed rods. After a few minutes of floundering around with a 7ips sinking poly leader that seemed to hang up on every cast, I got into some fish. Most of them were quite small. Either smolts or small trout. I don't believe any of them were much over 10 inches. What they lacked in size, they made up for in aggressiveness. At one point, I caught two fish at the same time, one on each fly.

Access Along Hwy 96
Air Temp Low 24, High 47
Water Temp ~49 F
Weather Sunny/Partly Cloudy
Flow ~1400 cfs
Time in/out 7:30am, 5:30pm
Leaders/Lines Compact Scandi

7.0 ips sink leader All day

12 lb FC tippet
Flies Size 12 soft hackle One half pounder, 22"

3” black intruder w/ dumbell eyes Several half pounders, 15-18 inch

Size 8 blue steelhead spider Smolts/small trout/half pounders

Various steelhead patterns pulls only




We explored this part of the river for a few hours. Eventually we decided to move downstream. I had picked out some possible locations via Google satellite maps. The first location turned out to be a dud. However, the second spot was a good one. We worked our way to the water and we both were getting bumps and pulls. As time went on, the bumps and pulls turned into caught fish. Most of them were in the 15 inch range. When I hooked one of the decent fish, Ted was nice enough to come quite a ways downstream to take the picture you see below. As someone who normally fishes alone, it was great to have someone get a picture.


She was around 17 inches and actually put up a decent fight. As with the others, I caught them with a 3” Intruder style fly. You can see it hanging out of her mouth if you look close enough. After trying out each others fishing rods, I went downstream to fish a hole at the end of a short section of rapids. I caught a few more fish, but access was difficult and I wasn't in the mood to balance on slippery rocks to try and get the fly into the only small seam that looked only slightly productive.


I walked back upstream, passing Ted that was now fishing where I caught that fish you see above. Went around the corner and proceeded to fish a section from earlier. On one of my casts, I was daydreaming when I felt about 7 inches of the dangling loop pull through my fingers. I set the hook and felt a sizable fish on the other end. After a few minutes, I had a nice 22 or so inch hen in my hand. Surprisingly enough, this bright steelhead took a small size 12 soft hackle. Not the trailing size 6 steelhead fly. This is one of the reasons I fish with two flies at once. You never know what they are interested in.

Continuing to step downstream, I rounded the corner to see Ted in the middle of the river fishing the far seam. I later found out that he caught some fish here. As I was swinging, I looked over at one point to see that Ted hooked a fish. It must have been a big one, because his rod was bent far over. The following is an excerpt of Ted's story. Read the rest in the comment section!
The last fish is the one that got away. And, surprisingly, it followed my fly bumped it a few times during the second half of the swing. As soon as the fly dangled, my line started to pull. I dropped the loop and waited, and waited. The reel sang for at least 10 seconds which seemed like eternity. The rod finally bent, but, I couldn't gain an inch of line. All I could do was to keep the side pressure on. After a few wraps of line in, it started running again...
It was now getting pretty late. I stayed until dark, but only caught some more smaller half pounders. What a great day. All in all, I think I brought around 18 fish to hand. Granted, a lot of them were small fish, but a good number were decent sized half pounders. I'm sure glad that Ted and I went to this river. Certainly one of the more memorable fishing trips in quite some time!

p.s. Thanks Ted for taking the photo.

Nov 20, 2009

Scandi vs Skagit

Common thought is that Skagit lines are what you should use when flinging sink tips and heavy flies. Unfortunately, over a typical day, I switch back and forth between fly sizes and tips so often, that going between a skagit and scandi is too much of a headache. (Yeah, I know, you can use a skagit line with a floating tip and small flies, but I prefer a more delicate presentation.) So, for those seasons that are not Winter, I'll probably be sticking with my compact scandi now.

Reason is, I performed a little test yesterday. I took a 120 grain versileader and put it on my 420 grain compact scandi. To the end of the tippet, I attached a 3" barbell intruder. On the first cast, I was ready for the fly to go absolutely no where. To my surprise it casted very nicely. The line laid over straight and I was able to hit 70-80 feet with no problems shortly thereafter.

Now I'm wondering what the max tip grain weight is that I can put at the end of that setup. We'll have to find out the answer another day. For now, I'm happy with these results. Now I know I can put on a heavy fly and decent sized sink tip on the scandi and expect it to work.

I won't be giving up on the skagit. For those days that I know I'll be using nothing but heavy tips, I'll put the skagit on and leave it on.

American River

As mentioned in an earlier post, I've decided to try and make my reports more helpful. Now, when I say more helpful, I really mean more helpful for me. This blog was originally intended as a journal I could return to, so that I could remember what happened and where. Problem is, after re-reading a few previous reports, I've found they aren't very helpful at all! Woops.

Access Paradise Beach, William H. Pond
Air Temp Low 38, High 64
Water Temp ~56 F
Flow ~1900 cfs
Time in/out 7:30am, 5:30pm
Leaders/Lines Compact Scandi

3.9 ips sink leader Morning

7.0 ips sink leader Afternoon

Intermediate sink leader Evening

12 lb FC tippet
Flies Various soft hackles 0 fish

3” black intruder w/ dumbell eyes 2 half pounders, 15-18 inch

2" bead head black rabbit strip leech nips/plucks

Size 8 blue steelhead spider 1 half pounder

Various hairwing steelhead nips/plucks only


Arrived late due to the car accident mentioned in a previous post. Started at Paradise Beach and worked the area most of the day. Went to William H. Pond in later afternoon. Never before at this spot, had trouble finding good water. Next time, will park closer to foot bridge and work that side.

Later in the morning, I decided to try something I hadn't done before. Put a heavy and good sized fly (3” intruder with dumb bell eyes) with 120 grain leader/tip on the end of my 420 gr compact scandi line. Had always used a skagit line for something of this weight. Guess what? It casted as well, if not better than the skagit line. Much to my surprise, 70-85 foot casts were not a problem with great turnover. Next time out, I'm going to try 10 feet of T10. At 100 grains, it will be a slightly lighter tip, but grains will be spread out differently. Want to see how smoothly it goes. If successful, I'll keep upping the grain weight to see exactly where it all falls apart.

Overall, this was a decent day on the water. I was a little frazzled from the excitement that took place in the morning. Won't be fishing next week because of Thanksgiving. Hope everyone has a good Holiday.

Side Swiped

Sometimes we get so excited to go fishing, we forget what can be one of the most important things. How to get to and from the river safely. So you can make it back to your family.

Yesterday, while driving down Hwy 80 to the American river. I was minding my business in the middle lane when peripherally I saw a truck approaching on my left side. He was VERY close to me. If my window was down, I could of easily touched the side of his vehicle. I naturally started moving to the right to avoid him and before I knew it, he moved right into me. Side swiping me and nearly causing a huge accident at 70 mph. Remember those action movies where a guy tries to run another guy off the road by smashing into the side of him? That is what this felt like. My only conclusion was that the guy had fallen asleep at the wheel and drifted into my lane. Then when he awoke, he jerked the wheel the wrong way- smashing into me. Luckily I was moving to the right, minimizing the impact.

I heard glass shattering and the crunching of metal. I slowed and started moving to the shoulder. Guess what? The guy wasn't about to stop. He kept going. I was furious! I floored it and followed him flashing my high beams. At the same time I was on the cell phone with 911.

The guy finally pulled over about 2 miles down the highway. I stayed on the phone with 911 in case he wanted to do something violent. It was about 4:30am and no one seemed to be getting off this exit in case something went wrong.

Long story- somewhat shorter. The guy had no insurance (does anyone have car insurance in this state? Pathetic!! Seems like the police don't care either!!) A CHP officer eventually showed up about 1/2 hour later after the guy had left (he was in a hurry to get out of there). Somehow or another, my car only suffered damage to the mirror. The breaking glass was his side window and the crunching must of been my beefy SUV mirror grinding his car as he moved into me.

I consider myself lucky that nothing worse happened. I was furious. But more importantly, I'm around to see my wife and son. Just wanted to say. Be careful out there.

BTW, I kept driving and although was late arriving to the river, I did fish the entire day. How's that for commitment?

Somewhere along the line..

I forgot what the purpose of this blog was. It was originally intended to be a journal of my fishing trips so I could revert back to it in order to remember what worked and what didn't. After re-reading some previous entries, it's obvious it isn't really all that helpful for me.

So, I'm going to try a new format. Starting with the next report (hopefully later today), I'll try to put more useful information in a more organized manner. We'll see how that goes.

Nov 17, 2009

Another Yuba Report

Went to the Yuba last week. Arrived much too early, so I took a short snooze in the car before walking to the water somewhere below Hwy 20.

This would mark my longest walk along this river. I'm not sure how many miles I covered throughout the day, but it felt like a million. Saw some new water that had plenty of salmon, a few half pounders, and some large trout. I did manage to catch a couple smaller bright fish in the morning that took a size 8 hair wing steelhead fly.

That was about it. It was quiet almost the entire day after the productive morning. Only a few short lived hookups here and there. Despite seeing a few bright fish leap 3 or 4 feet out of the water, it was non eventful. Still, you can't beat a day on the water.

Next up? The American.

Oct 31, 2009

Trinity Report

What better way to celebrate the fall steelhead return than a trip to the Trinity?

A few days ago I arrived somewhere upstream of Junction City before 4am. It was a deserted area that generally is devoid of people. I sat and mostly stared at the sky until the sun started to rise. What an incredible view. Thousands and thousands of stars. You certainly see nothing like that where I live, or where I normally fish for that matter.

It was a brisk 33 degrees by the time I geared up. I walked about 20 feet to get to the river to find a decent riffle. After stepping through, I had no takers. Not long after, I decided to move down river towards JC and try a different spot. Again, I made my way through several riffles and holes to get only one bump. The fish were no doubt in the deeper sections, but these were not very good for someone swinging a fly.

Again, I packed my bags and moved further down stream. After another couple of hours of swinging through some runs, I found this rock poking about 2 feet out of the water. It created a nice pocket behind and in front. I'd guess the water was about 7 feet deep immediately behind the boulder. A little deeper than what would be ideal. Casting across stream would of resulted in not being able to get deep enough. My game plan was to cast directly from above and at a slight angle, dangling the fly below. Allowing the size 8 soft hackle to drift in the currents and get pulled down by the hydraulics.

This was an ideal spot. Upriver of this boulder was some very fast/rough water. Below was another section of slightly less rough water. This rock was the first good resting spot for steelhead after coming up through the riffles. Because of its depth and relative safety, it also served as holding water if they wanted to stay longer. Simply said, it just looked good. So I wanted to make sure to cover it thoroughly.

That size 8 green/blue soft hackle with green body was just slowly moving in and out of the seams. The blue collar moved well and was perfect for this water. Just enough wire ribbing weight helped to sink it.

Hatchery Hen took this Size 8

I dropped the fly in front of the rock, dancing it around in the soft cushion. On one of the swings, I had a deep tug. Big fish! I wasn't expecting it, and I probably pulled the fly right out of his mouth. I calmed myself down and repeated the cast. Nothing. I tried several times and switch flies out. Still nothing.

After going back to that original blue soft hackle, I tried another time and received a couple of pecks. Probably from one of the smaller fish that were in the area. Since I had covered the front of the boulder well, I now worked on the seams to the far side. After repositioning myself, I sent the fly down both sides in the soft/hard water edge. No takers. Finally, I put the fly well behind the rock and slowly stripped it through the soft water. Gave it several periods of rest to let the fly float around in the current.

At some point, I felt this very slight hesitation in the line. My thought process is to slowly raise my rod tip on any hesitations or light pecks to see if anyone is home. I only set the hook if I feel the weight of a fish or pulling of line. In this case, after raising my rod I felt resistance. Not long after, the fish felt me pulling and went in the other direction. I set the hook, causing the fish to take a short run.

At this point, I didn't know how big or little the fish was. However, about 10 seconds there was no doubt. I tried to pull in some line when she came charging towards me. As it was, I had a coil of line laying in the water at my feet. I quickly reeled it up so that I could fight her on the reel. After I accomplished that, I started to pull the fish who was now holding tight behind the rock. She didn't like the tugging and went even deeper, bending my rod completely over in the process. Upon seeing this, it started to dawn on me that this could be a big one.

I tried to pull her out of the hole and up towards the surface. I caught a glimpse of her and then immediately saw her take off downstream pulling about 20 feet of line out. It was by no means a brutal run. What she lacked in putting distance between us, she made up for with deep pulls that bent my 6-weight over, almost to the butt.

I didn't want to lose this one. The bigger fish I've hooked lately have all gotten away. She wasn't jumping out of the water or making blistering runs, so I had an easier time of it. After about 5 or 10 minutes of getting her close to only have her bolt for another run, I finally tailed her.

This hatchery hen measured 28 or 29 inches with a nice girth. Definitely a healthy fish and pretty darn bright to boot.

It was only 3pm, but I considered quitting for the day. I actually felt satisfied. However, instead, I opted to go and explore some new water. I traveled a ways down river and after having no luck, came back up river to finish the day almost where I had started. I had a couple more very strong grabs and a couple of short lived hookups. But no more steelhead to my hand. I did catch at least 10 trout in the last evening hatch. They were no more than 15 inches in size, but put up a good fight.

It was a great day and catching a good sized fish made the long drive home more tolerable.

Oct 26, 2009

Lower Stan Report

The week before last, I made a trip to the Lower Stan. I'm sure you already figured that out if you read my other recent posts. So, here I am, late as usual with the official trip report.

Got to the dam before sunrise. So early in fact, I took a little snooze in the car. Luckily, I awoke before it got too light out. After suiting up, I went straight down to the river and started casting.

The river was up slightly from the last time I was here. Water temp was in the upper 50's. No sign of fish feeding on the top, but I knew they were down there. Just had to find someone willing to take a chance.

As reported in a previous post, I didn't see any salmon. Not that I was fishing for them, but I would like to see a better return. Unfortunately, it didn't look very good.

Had a three fly rig on with various soft hackles up front and a small hair wing steelhead fly as the anchor. Other than a couple of 10 inchers, it was quiet. I wandered down to where the water spills through a tight space and dumped into a slower section. If you are familiar with this area, you know what I'm referring to. For me, this is strictly a hang-down presentation. Let out some line and the current pulls it out the required distance. After letting it fish for a few moments, I'd start stripping it in. At one point, I had a really strong grab. The fish felt very solid and may of been a biggie. Unfortunately, he wouldn't commit and I couldn't get him to come back.

After a couple hours, I headed to the dam. Caught a few 15 inchers right near the dam. It was a little chilly with the water spraying down on me, so I worked myself downstream to find a bunch of fish feeding. A size 20 fly probably would of matched, but I wasn't in the mood to tie one on. Instead I found similar colors in a size 14, 12, and an attractor 10 for the anchor.

I could feel the line being hit as fish were on their way to the surface for the real deal. They completely ignored my offerings! After nearly slipping and falling into a deep slot, I carefully positioned myself for a down and across cast approx 20 feet over the feeding fish. The idea was that bigger fish were positioned a little bit further downstream where the current was slightly slower. After a few casts, I caught a nice 18 inch trout full of anger. Not more than 5 minutes later, I caught another. This went on for a while. These bigger fish were taking my fly after the hang down, while I was teasing the fly or slowly stripping it back. These fish ignored the fact that my flies were much bigger than the real bugs. In fact, the size 10 with a green color body, that in no way looked like the actual hatching bug, was getting the most attention. Matching the hatch is so overrated. :)

At some point I left the dam for two-mile. If my memory serves correctly, it was around 2pm. I caught some really small dinks and one 15 incher, but it was mostly quiet. Walking far down river till the canyon, I decided enough was enough. The water was just high and fast enough I couldn't find good holding water. I headed back and messed around a little in a few areas before closing up shop.

It was a pretty productive day. Caught around a dozen decent sized fish and a whole bunch under 12". A couple of them were bright with virtually no color. Almost certainly from the ocean. While I may not fish the Lower Stan that much anymore, it almost always makes for a productive day.

Oct 20, 2009

My Un-Scientific Salmon Count

While fishing the Lower Stan last week, I noticed a huge difference in the number of Salmon from this time last year. Unfortunately, I did not see a single one. Not to say there weren't there. I could of just simply missed them. However, last year at this time, I saw so many up and down the river, they seemed eerily absent. I can't help but wonder if there was a connection between the lack of fish and that I saw the DFG looking hard for poachers.

Hopefully they are just moving in late and will be here soon.

DFG on the river

I'd just like to say thanks to the DFG for being around the Lower Stanislaus. This is the first time I've seen them out there, and they were aggressively looking for poachers. As I was packing my car to move to another spot, they asked me a lot of questions about who I saw down at the river. It was a good feeling to know that they were there. Hope they show up more often.

Oct 9, 2009

Yuba Report

At the last minute, I was able to get away from the daily grind and get a day of fishing in. Based on decent reports, I decided to go to the Yuba.

This was the first time I've been on this river while the upriver of Hwy 20 portion was closed. Thanks to previous scoutings, I've found some excellent runs to fish in. This day was no exception.

I started the morning before it was light out. I waited in my car until the sun came up to avoid twisting or falling down a hill. Eventually I made it to my destination and started fishing. Even though I had the spey rod, I only needed roughly 15 feet of line. I was fishing a slow section off the main current near the bank. Looked fishy enough, but nobody wanted to play. Since I don't believe in sitting around and pounding one spot, I moved on.

Eventually I came to a stretch that I had found on a previous trip. With the low water (around 850 cfs), it was even more attractive looking. With my three fly setup, I put on a small size 14 soft hackle up front, a winged wet size 12 as the middle dropper, and the anchor was a size 8 steelhead fly of the skunk variety. Stepped through the first 20 yards of this run with nothing to show for it. As the current slowed, I started getting bumps and grabs.

Eventually I caught and landed a nice bright 20 inch fish. She took the skunk fly at the very beginning of the swing. I don't remember feeling the grab, but my spidey sense told me that someone was home. So, I set the hook and there she was.

That was the only fish I pulled out of that run this morning. Several other bumps and grabs, but nothing more. I decided to cross stream, which would of been impossible at higher flows and fished a sweet looking spot that produced a bunch of grabs. Unfortunately, I was low on drinking water and a headache was developing. I reluctantly left the fishiest looking spot and probably the best time of day to try and avoid a full-blown migraine.

The long 1/2 hour walk back to the car wasn't fun. However, upon getting back, I was surprised to see it was already noon! Time flew. I decided not to drive anywhere else, but simply walk upriver to another spot that had been productive on a previous trip. On the way there, I saw a group of 15-20 salmon spawning. I sat and watched them for about half an hour. Some of these fish were very good size. It was fun to see the big males chase off the smaller fish. It was a constant game of cat and mouse. What a hard life these guys have!

In my opinion, fishing here would of been a no-no, even if you weren't targeting the salmon. I decided to walk downriver. Eventually the water got fast enough that the salmon were no longer doing their business. I put my line in and started swinging. Nothing.

Eventually I went far enough downstream to get back where I started in the morning. I caught another fish or two in that same run. I stayed until about an hour before nightfall, and decided I'd get closer to my car prior to dark. I didn't want to get stranded out there without a flashlight. I've been through that before, and it wasn't something I wanted to repeat.

One last stop at a run that I had been to before. It is short, but always looked productive. I got a bunch of grabs and hookups that didn't last too long. The fish were being aggressive but non committal. Then, I felt this slight tug and slowly raised my rod to find a fish was on. This was a good fight, it took me a while to bring him in. He wanted to make a few runs and did pull a little line out. But, generally, I don't screw around and try to bring these guys in quick so that they aren't exhausted. This bright female was around 23 inches. A nice way to end the day!

Oct 2, 2009

Fall Cleaning

I'm overdue for a fly cleaning/check/reorganization. The last few days I've taken every fly I have (hundreds of them) and looked each and every one over. Firstly, I check to make sure it still looks fishy. Hackles still pointed in the right direction and wings together, etc. If it passes the look-test, I make sure the barbs are removed. Yes, there are a few flies with barbs, or barbs that aren't completely squashed. No matter if the regulations require it or not, I've decided to flatten them all.

Lastly, I'm sharpening all the hook points to make sure they are extremely grabby. I'd rather not lose "the big one" because of a dull point.

This is a time consuming process, but the results are worth it. I know my flies are in good shape and I know what type of patterns need to be re-tied. Not to mention my boxes look much more organized!

Sep 30, 2009

Trip Report: American River

My parents have been visiting from out of town, so this report is long overdue. Since my trip up to the Cowlitz in Washington, I've been hitting the American River a few times. I know, I swore I wouldn't go back to this place. However, the proximity is sometimes hard to ignore.

I can't go into details, because frankly, I don't remember any. Next time I need to write about it as soon as I get home. Not a week or two later.

One thing that I do remember, the weather was HOT. Around 100 degrees or so. That didn't stop me from doing a little more exploring outside of the Rossmore/El Manto area. I found some great water all the way from Watt to Upper Sunrise. Although fishing was slow, I caught a few half pounders in the 17 inch range. I used a variety of flies including soft hackles and smaller steelhead flies. All of the fish were caught on the steelhead patterns. Whether they were hairwings or speys.

I don't normally see other fly fisherman using two handers in my neck of the woods. However, I did see quite a few over those days. One of them proceeded to low-hole me on Upper Sunrise. Come on guys, use some common sense!? The other two were friendly and more interested in sitting around and drinking beer than fishing. Which was fine. At least they didn't jump in below me!

While wading around Watt. I found a revolver in about 4 feet of water. I opted to not reach down and grab it. I didn't feel like soaking myself, so it was left there. I called the Sacramento Police Dept, who referred me to the Parks Dept. I described where I found it and I'll assume they went and got it. On a later visit a few days later, I looked for it again and couldn't find it. Hopefully the authorities got it and not some hooligan.

Next week, I'm going to head up to the Lower Feather or Yuba. It will be one of those last minute decisions. I've got a new pair of waders to keep the water out! When the day is over, I look forward to having dry clothes underneath!

Sep 21, 2009

Trip Report: Cowlitz River / Washington

A few weeks ago, I was able to fish somewhere other than California. While attending a wedding in Seattle, I had a chance to spend a day with Steve Buckner, a guide on the Cowlitz river.

I didn't know much about this river before going. The only thing I had heard is that the fish aren't huge, but there is a better chance of hooking one. Good enough for me. I've only been targeting steelhead for a couple of years, so I'm at that stage where I want to learn as much as possible about where they can be found and how to get their attention. Having someone reinforce what you've read or learned on your own is nice.

Steve met me at the boat launch before the sun came up. While putting on my waders, he put our days transportation in the water. We were off just as there was enough light to see through the fog. This boat had the ability to go to any spot up or down the river, but I'm pretty sure we simply crossed the river and anchored up right there! Steve reassured me that this was a great spot, and I had no reason to think otherwise.

We started off fishing close in. No need for long casts. I had the compact scandi head out of the guides and not much more. We were up against the bank and I had to watch my d-loop to keep it from hitting the trees that we were backed up against. While I swung the fly, Steve shared his opinions on presentation and when to set the hook if I get a nibble. As mostly a trout fisherman, I have a hair trigger reaction to any grabs. That doesn't cut it with steelhead, it will take some major brain washing to get me to back off and let the steelhead take the fly.





We stepped down the river quite a ways. I got a few grabs, but didn't hook up with anything. An hour or two later, Steve walked back upstream as I continued to fish the last 50 yards. He came back with the jet and we went to the next spot.

I learned quite a bit about how steelhead move through the river and why. Not just where they hold, but the path they take while traveling and why they stage in one spot or another. No matter how many books you read or how often you fish, it is nice to have someone lay it out for you as you're motoring up/down the river. The fact that we were in a jet boat, really drove the point home.

I don't know how many river miles we covered that day, but we were all over the place. I fished in all sorts of runs with varied terrain at various depths. Steve also gave me some casting and running line managing tips. Although we were using floating tips, he showed me some different mends that can get the fly down several feet in the deeper runs.

I hooked a few fish throughout the day. However, I didn't get any big ones. I think most of the fish were sea-run cutthroats. Although, some of the grabs felt much more like steelhead. However, I wasn't able to get one. No matter, that is typical steelhead fishing for you. Steve taught me a lot about where to look for fish. Frankly, some of the spots he put me in, I would of surely passed by if I were on my own. I have and will use what I learned on my usual steelhead waters around home.

If you are ever in Washington and want a great steelhead guide, I don't think you can go wrong with Steve.

Aug 18, 2009

Trip Report: Lower Stanislaus

Finally, back to my favorite haunt, the Lower Stanislaus. It was to be another hot day, at or near 100.

The day started off rather slow. In the morning, I was swinging various soft hackles in groups of two. I caught a couple of fish somewhere around 12 inches as I scurried the rocks in the deep pools. As the fish seemed to have lock jaw, I moved downstream to some areas I had never been. I actually didn't think access was possible, and never attempted to go down that far. However, it ended up being pretty easy at these flows and I found a spot with some fish that were actively feeding. I hooked a few, but they were able to rid the hook in short order.

I decided to move back upstream towards the dam and perched myself on a rock to cast all the way across stream for the biggest swing possible. At the time, I had a soft hackle in front, and a larger steelhead fly in back. I decided to do something I don't normally do, and it turned out to be an almost revelation.

Generally, the idea when swinging flies is to get them to swing as slow as possible. Potentially start with a dead drift so they can get some depth, then lower the rod tip through the swing to slow it down as it makes the trip back across the current to your side. For some odd reason, I decided to actually do short little strips. My theory was, that I'd fish that steelhead fly like a streamer through the deeper water. It had long spey hackles on it, and I figured the pulsating of those hackles would get a fish to bite.

Not long after doing this, to my surprise, I hooked a fish. He bit clear across the river, and I brought the 15 incher to hand. The whole time, I was thinking, I can't believe he went after that stripped size 4 stealhead fly.

However, when I picked him up, I noticed that he actually ate the size 12 soft hackle! Since when do fish go after a stripped soft hackle? I've been fishing soft hackles for years and years, and this is something that I rarely did! (Mainly because, the times I did it, it just didn't seem to work.) This proved key later in the day.

Another hour or two went by, and I had moved to another spot downstream. Which will remain nameless. By now, it was the hottest part of the day. Fish are supposed to be hunkered down. However, they weren't. They were keying in on a hatch and fish heads were exploding out of the water left and right. I mean, they were everywhere! I didn't know there were this many fish in the river, let alone in this one little spot. In any one instant, I could see two dozen fish breaking the surface. It was amazing. I have never seen anything like this on the Stanislaus. Come to think of it, I may of never seen this before, period! To make it even more incredible, were the size of these fish. These weren't dinks. They were decent sized of 15-20+ inch. At one point, I actually climbed up about 15 feet to get a good look and the water was filled with trout of all sizes. Hovering at various depths. Munching bugs on the surface and below. Incredible!

Needless to say, I was excited. I hurried to rig up some small soft hackles that somewhat matched size and color of what they were eating. Nothing! Not a single bite! I could actually feel fish hitting my fly line as they busted their way to the surface. However, no one was going after my flies.

Okay, okay, I had the wrong flies on. I changed it up. Same thing! I changed again and again. This went on until I had gone through literally, 15-20 different flies. I was deflated. They were so keyed in on the hatch, that they ignored everything else. And I couldn't get close enough to that food source.

I sat there staring at the fish exploding through the surface. Teasing me, and surely laughing at me. I actually walked away from this incredible hatch and went elsewhere. I caught a couple of fish in another area, but I couldn't get over that sight back in the last pool. So, I went back and tried again. Nothing, nothing and more nothing. It was hours later and these fish were still absolutely everywhere. They were gorging like there was no tomorrow (the hatch literally went on for hours during the middle and hottest part of the day!)

I started reflecting on the day and remembered that time I caught the fish by stripping a soft hackle. Since nothing else was working, I decided to try it again. I cast out into the hordes of fish and started doing quick short strips. WHAM! I caught a fish! What the??!

He was 15 inches and fought hard. When I took the fly out of his mouth, I realized he ate a size 10 soft hackle. Very much larger than the bugs that they were eating. Huh, whatever! I finally caught one of these guys.

I let the guy go and cast/strip again. WHAM! Even bigger guy. Two casts and two fish. Is this coincidence? After releasing him and casting a third time, I didn't make it 3 for 3. However, in the next hour, I caught at least 20 fish. All of them were around 15 inches, wild, and full of fight.

What is the moral of the story? When you think you know something, you really don't. I would of never tried stripping those soft hackles if it weren't for that steelhead fly I tied on earlier in the day. Now, I have a new trick up my sleeve. And you can be sure I'll do it again.

This turned out to be one of those epic days of fishing. Not only did I catch a boat load, but learned something in the process. This happened a couple of years ago on Cherry Creek, and I know how seldom these days actually come along. It won't soon be forgotten.

Trip Report: Yuba

It was another hot day on the Yuba. Temps were probably near or above 100 degrees. Not so bad as long as I stayed near or in the water. Fishing was pretty good, however, in typical Yuba fashion, nothing mind blowing.

I arrived around 6:30am and was fishing above Hwy 20 not long after. Within the first couple of hours I had caught a couple of trout in the mid teens on soft hackles swung through the current. I spent more time than usual in only a few areas, trying to get some fish to bite on various flies, but it just wasn't turning on. No fish were rising and they must have been hunkered down in deeper holes.

By mid afternoon, I parked myself at the island just above the Hwy 20 bridge. I had 10ft of T-14 sink tip and an intruder style fly with barbell eyes. The setup cast well with my 12'6” spey rod and I was trying to entice the larger fish that were in the pool deep below. For the longest time, I didn't have any bites, but finally had a rather large fish come from the depths to latch onto my fly. It was more exciting than usual, because I saw the whole thing. He was slowly pacing the fly as I was stripping it in, and when it was within 15 feet of me, he roared upwards and engulfed it. I'm not sure how big he was, because he only stayed attached for about 10 seconds. However, he gave up a good fight and broke the surface a few times to frantically rid himself of the hook. My estimation was that around 22 inches. He had no problem attacking that 4 inch intruder.

This trip was last week, and honestly, I'm having a hard time remember the details since I've been on another river between now and then, memories are faded. If I remember correctly, I hooked a few more fish before nightfall. Sometime in the late afternoon, I met up with a friend who caught a few fish of his own too.

Near dark, we almost reached the parking area along the dirt path, luckily, before it was too late, we saw a rather large rattle snake in our way. We paused as he scurried off. Man, I do not like snakes! This guy looked to be 3 or 4 feet long and was almost impossible to see. Glad no one stepped on him.

Aug 10, 2009

Fly #50: A couple of winged steelhead patterns

Starting off with a flashy wing, this steelhead fly is tied on a size 8 salmon hook. Dubbing is arctic fox with oval tinsel ribbing. The tag is silver tinsel. Generally, I'd use this during high or off color water. Or in some cases, when nothing else seems to be working.


The second fly is made up of much more muted tones. I'd use this on clear water. However, if the water is really low, I'd probably opt for a fly that is more sparse than this.


I decided to use hare's ear for dubbing. I don't do this very often on steelhead flies. Not sure why, it really has great buggy qualities that would attract trout or steelhead that have been in the rivers for a while.

Fly #49: Blue Spider Steel

A recent re-stocking of tying material included some blue hackle. While I'm a big fan of neutral tone flies, patterns very similar to this have caught both trout and steelhead.


I firmly buy into the thought process that presentation is far more important than fly choice. If you are targeting trout during a hatch, you may want to roughly match it. However, when a hatch isn't on, you can catch fish on just about anything if you make it move the right way.

Fly #48: Feather Wing

In order to prepare for Fall, I've been tying a few steelhead flies. The one you see below was tied on a size 8 salmon hook. Flies similar to this have been very successful in the Central/Northern Californian steelhead waters.


Generally speaking, I have more confidence in flies with natural tones. Besides working on steelhead, this will also catch trout and if you're not careful, squawfish! :)

Aug 6, 2009

Still Kicking

I've been busy with other things, so this blog hasn't been updated a whole lot lately. There are a backlog of flies ready to be photographed and soon to be fishing reports.

I promise to have something worth reading/looking at in the next couple of days. You'll shortly see some Yuba, Feather, and Stanislaus reports. In early September there will even be some steelhead reports from my trip to Washington.

Jul 14, 2009

Fly #47: Intruder

Ed Ward came up with an incredible steelhead fly called the Intruder. After the secret got out, it became a very popular pattern. Since it takes a really long time to tie, I made several short cuts with my variation.



While not an official Intruder. It has some of the same qualities. Minimal materials, while still looking bulky.



I've done well with big flies swung deep. Both steelhead and large trout take notice. Big flies catch big fish. One more reason to add this fly to my box.

Jul 13, 2009

Report: Truckee

Last week I was able to hit up the Truckee River. This is a great piece of water, I wish I had more of an opportunity to visit.

Knowing my fishing time is limited this summer, I wanted to make sure I was there bright and early. Leaving the house at 2am put me riverside just before the sun came up. I strung up my switch rod with barely enough light to see.

Carefully, I waded out and fished a long riffle just off Hwy 80. After about 15 minutes, I landed my first fish on a size 10 Prince Nymph. These flies are hot. I tie mine with a soft hackle up front in various sizes, some with beads and others without. For some reason, the fish have been excited to see them all year. If I remember correctly, I was fishing a soft hackle of some sort as my second fly on a 10ft intermediate sinking poly leader.

It was still before 7am, and I thought this was going to be a good day. I continued down stream and explored some spots I haven't been before. A few hours later, I headed back to the truck for a water refill.

After a big old drink, I scrambled down some rocks and scurried along a hillside filled with boulders the size of car tires. It was slow going. Eventually I found a spot and after a few swings, I caught my second fish. This guy was small and aggressive.

It was time to move on, I loaded up and went down the highway to the next exit and hit some spots that looked good on satellite maps. By now, the wind was whipping at least 20mph. The day was getting warmer and I decided to put on a heavier sink tip and bigger fly. I was trying to get lower in the water column to where I thought the fish were holding. A few hours went be with nothing to show for it.

I found a nice spot with deep water. I decided to put on 12ft of T10 and a 4 inch bunny leech. My switch rod didn't handle the tip and the heavy water logged fly as well as the spey. But I kept at it. Eventually, I had a nice fight with a rather large fish that lasted a whole 15 seconds before he came off. After spending another 1/2 hour trying to get him or one of his friends, I gave up and moved on.

I went back upriver to explore some more new locations. There was some white water pouring into a deep pool. This looked like a good place for fish. Unfortunately, I couldn't get anyone to bite. It was rather difficult casting. No wading whatsoever available and with trees right behind you, it was impossible to form any sort of d-loop to get the fly very far. Moving downstream yielded more wading possibilities, and the water looked excellent. However, no one was interested.

I moved upstream to a place I've been before and it was more of the same. I caught a few smaller fish, but nothing to write home about. It was getting late in the day and I needed more water. After climbing back up to the vehicle, I decided to go elsewhere instead of going back down to the river. I drove somewhere off Glenshire Blvd for my last hooray of the day.

The wind never did calm down. It was still swirling almost non-stop. Combine that with a long day and I started getting sloppy. I formed an upstream d-loop, instead of a downstream and when launching the cast forward, the fly nailed me in the forearm.

It stung. A red hot shooting pain told me the fly was in my arm deeply. After an inspection, I was right. The fly was embedded into the underside of my forearm- all the way to the hook bend. It was deep and very painful. I tried to pull it out, but my skin just stretched. I knew I had to yank it. And although the fly had no barb, the spot where the barb once existed was rather large and made for tough removal. I held my breath and yanked it out. The blood started flowing and I stood there wondering what sort of negative side effects I was going to have. I raised my arm above my head and put pressure on the hole until the blood clotted. The area was discolored and I wasn't sure if it was a big deal or not. I decided to keep fishing and take my chances. (No lasting effects. Some bruising and a couple of holes are it)

I caught a few more fish that evening in various pools/riffles. But I couldn't stop thinking about that hook and it made me apprehensive on every cast.

Just before nightfall I returned to the car and went home. I took a shower and was in bed a little over 24 hours from when I first left.

Jul 6, 2009

Mike Kinney Casting

This is a simple video of guide Mike Kinney casting his two hander. Mike is really well known in the steelhead world and is a nice video to watch if you are interested in two handed skagit casting.



Like Ed Ward (see next video), they have slow and smooth casting strokes.

Skagit Master

Ed Ward is one of the Skagit founders. Although I've never met the man, I've exchanged emails with him and he truly is a knowledgeable fisherman. Not only is he the "Skagit Master", he knows how to catch fish. I originally heard his name along with the famous fly he introduced to everyone. The "intruder" is well known to steelheaders. I hear he is currently using a more modest fly, simply a rabbit strip and a hook. Whatever he puts in the water, he catches fish. He is the man.

In a month or two, he will be featured in a DVD called appropriately enough, "Skagit Master". This is definitely something that will be in my player. And that is saying a lot, since I don't make a habbit of collecting fishing/casting videos. Here is the trailer for this film.



Visit youTube to see this in HD!

Jul 5, 2009

Surf Perch?

I made my first attempt at fly fishing in the ocean. Only spent a couple of hours while my wife and son played in the sand. I got a bump or two, but nothing more. It was more a chance to figure out what the heck I was doing. I really had no clue.



In an unusual twist, I actually have video! Since my wife was around with a camera, you can see a few seconds of me casting my switch rod over head. The two handed rod worked surprisingly well, I was able to cast pretty far over the breakers through a wicked wind blowing in my face. Even with the 10 foot sink tip.

If it weren't for the wind knots, it was a killer day. I'd like to go again soon.

Jun 17, 2009

Trip Report: Yuba

For this first time in I don't know how long, I went fishing on a Sunday. I normally avoid the weekends due to crowds. However, considering my workload, I didn't have a choice.

Surprisingly enough, my trip to the Yuba, above and below the 20 bridge, was relatively uncrowded. I did see other fisherman, but had no problem finding empty spots.

I'm going to wrap up this report quickly as I need to get back to work. The day was warm and the wind was acceptable for a change. I ended up catching 3 fish. None of them were over 15 inches. One was caught in deep water while high sticking my spey rod (yeah, I know, not the best use of a spey rod) around some rocks, right near the shore. If I remember correctly, he took a size 12 bead head prince nymph. About an hour later, I caught a 15 inch fiesty trout on the swing in some heavy riffles. This guy was caught on a size 10 partridge and orange soft hackle. The last fish was caught late in the evening on a small generic steelhead fly.

Started the day off with a 420 grain skagit line and 8feet of T-10 sink tip. I worked a run above the hwy 20 bridge pretty thoroughly for nothing. At some point, around noon, I switched to a 420 grain scandi line with a 15 foot floating leader and tried skating some flies. No takers.

I kept the scandi line on and switched to a 10 ft 3.6ips polyleader. This was kept on for almost the rest of the day. This is what I had on while catching those three fish. Late in the day I moved to a clear 10ft 1.5ips polyleader. Nothing with that one.

It was a good time. Especially appreciated because I'm not able to get out much to the river lately. Fingers are crossed for another opportunity soon.

Flow around 2,000
Water temp approximately 50 degrees.

Jun 5, 2009

Underwater fly fishing?

Because of a brutal work schedule, I'm not able to do much fishing these days. The only thing I seem to be able to do is live through others experiences.



I found this video on the net. Wow- how excited would this be? Amazing.

May 27, 2009

Fly #46: Sunset Blue Waker

This is one of my favorite waking flies so far. After giving it a test drive, I'll let you know how it performs.

May 20, 2009

Trip Report: American (Shad)

I've always wanted to try fishing for Shad, but I've never taken the plunge. On Monday evening, I took up an offer to be shown where to go on the American for these feisty fish.

We weren't to meet until 6pm, so I arrived a little early around 3:30 for some potential half pounder action. The temp was in the high 90's and thank goodness for leaky waders, cause I was pretty miserable. I waded and walked down some riffles and pools, but didn't get anything more than a bite. So much for steelhead.

I met Aaron a little after six and we walked for a few minutes upriver. He knew exactly where to go. Aaron started flicking out his jig (he wasn't using a fly rod) trying to locate the fish. I watched for a few casts and then started trying to get my line out there. We were in a section without much current, and frankly, I was struggling. I couldn't get the fly out very far and without the current swinging the line downriver, it was awkward at best.

Aaron didn't have the same problem and it wasn't long before he caught his first fish. He offered to give up his spot and I stepped in and didn't have any luck. Aaron seemed to catch fish wherever he was, so I knew they were there, I just couldn't get 'em.

I'm not sure how much time went by, but we moved downstream. Eventually and smartly I took off the longer scandi line and put on the short compact skagit with a 10 foot sinking leader. This allowed me to strip in further each time. We were now in a place with more current and swinging was possible.

Aaron needed to take off, and before he left, he gave me the jig that he was using. I thought I'd try it. My shad flies didn't seem to be working (upon further review, I think it was the presentation, not the fly) anyway.

Not more than a few minutes later, I was getting casts out 60-70 feet. Flicking it slightly upstream, I'd let it sink for a bit then twitch the rod here and there, followed by a strip. I finally got a bump! The next cast, I caught my first shad. He wasn't real big (maybe 15 inches), but inch for inch, he gave up a decent fight.

It was getting late and I was just now discovering a method that worked. Too bad it took me until then to figure it out! By dark, I caught 3 shad and hooked a bunch more. Whatever I was doing - worked. I'll be back to try again. Thanks Aaron!

May 18, 2009

Fly #45: Waker 2

Here's another waker that I tied a few days back. This one is on a size 8 hook and although I don't know how it looks in the water yet, I'm sure it will make quite the disturbance.

Waker 2

Tail: Squirrel tail.
Body: Brown and gold dubbing with palmered hackle tips.
Head: Red Buck Tail.

May 14, 2009

Fly #44: Waker 1

I've always been interested to try and make a steelhead rise to a waking fly. For one reason or another, I never made much of an attempt. I decided to tie a few up and give it a shot next time out. It looks like a fantastic way to catch a fish.


Waker 1

Hook: Size 10 Upturned Salmon.
Tip: Silver Tinsel.
Tag: Hot Orange Floss.
Body: Brown Dubbing with Palmered Hackle Tip, Craft Foam.
Wing: Yellow Deer Hair for easy visibility.

Fly #43: Brown Spey

A fly similar to this produced on the Feather the other day, so I decided to tie another up.


Brown Spey

Body: Angora dubbing, black schlappen palmered, oval tinsel rib
Collar: Guinea feather behind wing and hackle tip in front
Wing: Mallard
Tag: Oval Tinsel


May 10, 2009

Trip Report: Feather River

A week or two ago, I became the proud owner of a new spey rod. Instead of building another, I decided to simply purchase a 6-weight. Ever since, I've been itching to try it out somewhere other than the casting pool. The original plan called for a trip to the Yuba. However, the flows were much too high and I figured this would be an excellent opportunity to visit the Feather.

I've never been here before, so I went through my usual intelligence gathering. Satellite maps, flow reports, fishing reports, and contacting some people that have been there. It was decided to try the area between the hatchery and Palm Ave.

At early morning, pre-dark, I entered through one of the many gates to the wildlife off Larkin. The road was nothing more than gravel and rock. Pretty darn bumpy and rough. A maze of unmarked trails made for some navigation problems. However, my first stop was pretty easy to find.

This river is big! The sat maps don't do it justice. Even with my two hander, there was no way I could cast across the whole thing. So, I concentrated on what I could reach. Started with just the leader out of the tip and swung a generic soft hackle with a larger size 4 steelhead fly with black flowing spey hackles. Both were attached to a couple of feet of mono and then a 7ips sinking leader.

Didn't see any signs of life, but the river looked fishy enough. I slowly inched out more line on each cast. Eventually, I was casting out 60 or so feet, swinging it down, letting it hang, followed by a few steps down the river. This went on for a while. No bumps, no bites. Nothing. Birds were out, diving into the river for what I assumed were fish. So I kept at it until the river got too deep to comfortably wade.

Not long after, I chose to crawl up the bank and back into the car. The road was easy to follow since I could just hug the river, but it required slow-going. After spotting another fishy looking spot, I started swinging again. By this time, the wind was whipping along at 15 or more mph. I'm not sure what it is, but anytime I plan for a day on the river, it gets windy. Today was no exception.

After a few wind knots, I had the line swinging 60-70 feet out. There were no boulders or any other targets to aim for. It was a wide open search and destroy mission. I prefer targeting fish holding spots, but these larger rivers make it difficult at times. As usual, I tried to position myself so that my downstream dangle was on a current seam. Just in case someone was lurking on the slow side waiting for food to flow down the fast side.

About 10 minutes and 50 tangles later (lots of debris in the water), I felt a bump in the heart of the swing. I resisted the urge to set the hook and just let the fly swing further. Just as the fly came to the end of the swing-- WHAM, the fish hit a second time. He followed the fly a pretty good distance, at least 30 feet. The line went tight and the fish took off for the middle of the river.

This was the first time catching a fish on this rod, so I wasn't familiar with how it would feel. But it felt like a big fish. He wasn't peeling line off, however, at 65 feet out, it was rather challenging to maneuver him back to the slower water.

This is the fly that caught the first fish of the day.

At some point I caught a glimpse and noticed he was pretty good size. A few minutes later I had him to hand and put him up to my rod for a measurement. Earlier, before leaving home, I measured from the butt of my second grip to the top of my first. It is 23 inches. This hatchery fish stretched slightly beyond. I'd guess he was 24-25 inches and bulky. He took the size 4 spey fly and after removing it, I set him free. It was only 9am, and this would be the last bite I'd have until the afternoon.

It is a blur to me now, but at some point I got back in the car and drove further upstream. The road got worse and it became harder to figure out which direction to go. Not one, but two and a half HOURS later I was fishing again. I did a lot of really slow driving trying to find a place to fish. Nada.

I decided to check out the fish hatchery up near the dam. What a fish-ladder. If you haven't been here before, you've got to check that thing out. It is quite the run. Someday I'm going to come back here with my wife and son, we'll check out the rearing ponds and the underwater viewing area. I was too eager to start fishing again to bother today.

I drove more and more. Good thing I laid out a ton of potential fishing spots mapped out the night before. Those roads in the wildlife area are a major time waster. Next time, I'll go in and out of a few gates, but not drive through the area any further than I have too. It is just too time consuming. Unless you have a beater of a car, it pays to drive a little slower to avoid the dents (some sections of bigger looser stone requires 4wd and a high clearance, be careful if you have a 2wd car).

Eventually I found a spot to fish again. It had been so slow, that I looked for deeper, slower water. I even put on an absolutely huge split shot on and two heavy flies to get down. It didn't help. No bites.

I wandered downstream to this really neat little spot. It was very hard to get to, and you had to balance carefully on these rocks, but the water looked so fishy. I spent quite a bit of time here with no results. Even though fish were starting to rise for bugs, I couldn't fool anyone. Out of casting range, I saw an absolutely huge trout jump out of the water. It was quite the sight to behold. If it weren't so windy, I'd be able to target the rising fish more easily.

I decided to go back to the car for some food. It was probably 3pm by now. After the long walk up a steep hill, I chose to get in and drive somewhere else instead of walk back to the river to a spot that wasn't producing. Besides, this was a day for exploring anyway.

I found this island that looked absolutely incredible. Such a great place to fish. Unfortunately, I couldn't get out to it. Not that I didn't try. There was this narrow strip deep water keeping me from crossing. I was very disappointed. If the water was slightly lower, I could of made it.

Discouraged, I walked downstream to end of that island. When the two forks joined again, there was a swirl of current. Far out into the river, the two swirls met and made this great back eddy. The water just seemed to stop here. I was thinking that this had to hold fish. How can I get to it? Sure enough, a few minutes later I saw fish rising. I tried different angles and casting to various drifts to try and get into the slow water. But the current on either side was pulling my fly out.

The answer was to wade a little further upriver and cast at a very awkward angle, down and across. I had to put out 70-90 feet of line to get to it. On that very first successful cast, where my fly just sat in the slow water-- WHAM! I scrambled back out of the current to slower water where I could bring the fish in. This guy measured about 22 inches. He put up a good fight.

I worked this eddy for a while. There was a 45 minute or so window when they were hitting on almost every cast. There was also something very big lurking in there. Or maybe several big ones. I lost two flies tied on 8lb mono and had the hook straightened on not one or two, not three, but four flies. The hits were so hard, it was alarming.

A few minutes later, I cast my fly out about 60 feet, lifting the line high out of the water trying to keep it from getting swept in the faster current, the fly swung almost in a dead drift as I fed running line in to keep it drifting beyond 90 feet. Smack! Hit again. But this time, the hook didn't bend, he was staying on.

Instead of running away from me, he came flying towards me. I stripped in line as fast as I could to try and keep it tight. Before you knew it, I had about 50-60 feet of running line under my feet. This was not good. It was a big fish and I wanted to use the reel. I reeled in the slack, but it got so bunched up from being loose, that my reel got jammed with line tangles. Somehow I kept the line tight and untangled the running line from my reel at the same time. I carefully waded over to the slack water.

I worked the fish to my hand that was in the water waiting for him. A tailed him, but when I tried to pick him up, my hands were so shakey. I've never been like that before, I was physically shaking from the adrenaline. I couldn't keep a grip on him. Maybe he felt my moment of weakness and had another spurt of energy. He took off between my legs. Sure enough, he had looped the tippet around my boot and the line broke. Buh bye. :( If I were to guess, he was upper 20's. But, it was hard to say for sure. At least mid 20's. Whatever size he was, the excitement gave me the shakes and he got the better of me. Good for him.

This section was very productive. Over the course of an hour or two, I caught 5 fish. None of them were under 20 inches. I lost several more and had some really big grabs. Still, I decided to move on before it got dark.

Further downstream, I found another good looking spot, but didn't have any luck. Between it getting dark and the swarm of mosquitoes that were attacking me, it was time to go.

This was a unique experience. It is the only time I can recall that I caught this many fish and not one was under 20 inches in length. Normally, I'd get a few small guys. Happily, I'd take that next time out.

May 7, 2009

Steelhead "Summer" Box #1

Just for grins, I took a picture of my go-to steelhead fly box. These are all the low-water and summer flies. You can see several that I've posted pictures of on the blog and a few that haven't made an appearance.

Summer Steel (Click for a larger picture)

At a later time, I'll post my winter box. The big ugly and heavy ones.

May 3, 2009

Lining Rods

Spent a couple of hours at the casting pools to try and dial in some new lines on a couple of rods. First off, I've had much too light of a line on my main weapon of choice. While I could overhand it nicely, it just wasn't heavy enough to pound out some longer casts with a some sort of water borne anchor cast. I felt that 65-70 was pretty much maxing it out. With my skill level anyway.

Today, with a heavier line, I could get out further. 70-75 feet wasn't a problem, even though I wasn't standing in the water (an important note considering these are spey casts afterall) .

Now, when I tried a few lines on a longer 12'6" rod, ziiing. I was hitting 90feet without much difficulty. Again, standing out of the water. When the temps warm up later this week, I'll get my feet wet and see what happens. In that scenario, I'm hopeful that I can hit 100 feet.

Ninety Nine percent of the time, I don't need to cast anywhere near that distance. However, on those occasions that I do, it is nice to be prepared. This fall, I'll be up in Washington for a steelhead trip. I want to be comfortable bombing out 80-100 foot casts if possible.

Apr 27, 2009

12 Hours on 4 Rivers.

I rarely fish on the weekends these days, but Saturday, I made an opening day exception. I met up with Curt (thanks for the fun day) around 7am on the Main Fork of the Tuolumne to start things off.

As usual, the T was beautiful and looked very fishy. Surprisingly, the water was not high and was actually a little lower than I had seen it on previous outings. What didn't change is the tough fishing. I've only pulled a few fish out of this river in the few times I've been there. Nothing happened today. Not even a bump.

Around 10am, we decided to head to Cherry Creek, above the power house. The water was rocking. I wasn't expecting so much flow. Much higher than the last time I was here. Unfortunately, access was difficult and there weren't a whole lot of good spots to fish. Eventually we managed to find a location where some small fish hung out. I caught a handful, all 10 inches or less. Like the last time I was on the river, darker flies seemed to be their favorite flavor. And today, wooly buggers and anything with a marabou tail attracted the most attention. Even if it only got them close enough to see the smaller soft hackle and pound that instead.

After a few hours, we went down to the Middle Fork of the Tuolumne. I've never fished here before. It was crowded for such a small stream. I guess the access was too easy for people to pass up. Initially it was slow going, but as time wore on and I started getting down deep with the flies, it improved.

Because the river was small and the water was cold, I started high sticking some weighted soft hackles with split shot on the leader. This seemed to be the best way to go until the evening when the fish were starting to come to the surface after swung flies. At that point, I put on a size 10 steelhead pattern in the rear with a smaller soft hackle upfront. They were loving the combo. This particular pattern produces well on the Stanislaus, and did well here. It is an ugly little thing with red dubbing and very flashy wings. When swung slowly in the right conditions, it is hard for trout to resist. Again, nothing that large was caught, but for a day that started out slowly, you end up happy with anything.

The day was wrapped up by heading to the Rainbow Pools over on the South Fork of the Tuolumne. There was only an hour or so left of daylight, so one had to be quick. I was happy to see that no one was here and I had the place to myself. Again, with heavily weighted soft hackles, I'd drop them into pools, only to let them rise near the tail outs. This really attracted the fish. They'd follow the flies from 6-7' depths to near the surface. Quite a lot of movement for such cold water. If they didn't take on the rise, a twitch or two on the rod often made them commit.

For someone who likes to swing flies, I did very little of it on this day. Mostly high sticking or very close in swinging while holding almost all of the line out of the water. Slow and deep was the trick. I ended up with a dozen or more fish to hand. Most small, the largest being only 15”. Still, quite an enjoyable day.

Apr 16, 2009

Fly #42: Yellow Spider

I've been tying a lot of steelhead flies for the last so many months. It has been great fun, but while on the river last time fishing for trout, I realized that I'm running low on some of my "go to" soft hackle patterns.

In response, I've spent the last few evenings tying various trout flies. I've been concentrating on sparsely dressed spider patterns. These are meant to be fished right in the surface film, or just below.


Yellow Spider (size 12)

Body: Yellow thread, copper wire ribbing, hares ear dubbing
Collar/Hackle: Natural Partridge, stripped on one side

Speyorama

I'll be there tomorrow (Friday), will you?

If you are a two hand guy, or interested in it, this is where you need to be. Go to their website for all the details.

Apr 13, 2009

Snakes

Indiana Jones and I have something in common. Our discomfort for snakes. While on the Yuba the other day, I had the fortunate or unfortunate, depending on how you look at it, experience of crossing the path of not one, but two snakes.

Normally, I'm okay with it as long as it is a comfortable distance away. Even when close, I'm not one to run or scream like a girl, however, I rather not meet them on those terms.

The first snake was pretty small, maybe a foot and a half. He was on the path and I saw him when he was a few steps away. He slithered off and after I took a breath, I continued on. I'm not sure what kind he was, but he didn't seem very threatening. (Yes, I know, the small ones can be bad too.)

The second snake freaked me out. It was late afternoon and I heard a rustle when I looked down and saw a pretty big snake, in both length and girth less than 2 feet away from my boots. Since he was at least 4 feet long, probably even longer, I wasn't feeling very comfy. I froze in that spot and waited for him to saunter off.

Innocent enough. The next thing I know, this guy climbed up the tree next to me in no more than a few seconds. That freaked me out a little. A few more seconds and he was about 7 to 10 feet in the air above my head.

I was not feeling good about that! I darted off and watched from a safe distance as he went from branch to branch seeming to defy gravity. It's one thing to have a snake below you, but when they get above you... Yikes.

When I was younger, I would often float the Ozark rivers in a canoe. Going under branches, you had to be thoughtful of the possibility of a snake in your face or falling in your lap. And yes, it did happen once. A snake fell from a low tree into the canoe at my feet after bouncing off my upper body. Perhaps that was the start of my anxiety. Who knows. Whatever the case, I'd rather not see them unless I'm watching Animal Planet.

Speaking of snakes, there is a video you can watch of a rattler swimming across a lake and trying to get in a guys boat. Not cool! I'm not exactly okay with the guy tormenting the thing, but man, I don't know what I would of done in that situation. It is bad enough when I see snakes swimming around me while wading. I don't want one trying to get in my float tube some day.

Apr 12, 2009

Trip Report: Yuba

Once again, I'm late with another report. Chalk this one up to a busy schedule or laziness. Your choice.

Last week, I made a pilgrimage to the Yuba. I arrived bright and early and waddled my way upstream of the 20 bridge and crossed river well after the bend. Someone remind me to replace the felt on the bottom of my boots. I was slip sliding all over the place and came close to taking a few spills.

After managing a rather clumsy crossing, I went back downstream and put my line out. I had my two handed rod and a 7ips sinking polyleader on the end. I started off with a black string leech, but wasn't really in the mood to power that sucker. So, I replaced it with two soft hackles.

I stepped and swung through the run starting high in the riffles. Nothing happening. There were fish around as I saw a few rises. At one point, I was stripping in my line as the fly hung down below me. I felt a tug and a bright shiny fish took a 3 foot leap out of the water. He looked to be around 17-20 inches. I can't say for sure, because he managed to remove the hook after a few seconds. While it was a short battle, he put on quite the show.

I spent a good hour or two going through this piece of water. Eventually I had enough and walked upstream a ways. While I was the first one on the water, there were now a few people around. And unfortunately, not only people showed up, but wind did as well.

The weather forecast called for rain and a slight 10mph breeze. WRONG! It didn't rain but for a few minutes late in the day. Furthermore, the wind was whipping! We are talking 30-50mph gusts. It was beyond difficult to cast.

I stayed anyway. Waiting for the gusts to slow for each cast. It wasn't impossible, but it wasn't pleasant either. Despite the rough wind, the fish were there. Around noon or so, the big fish were sipping on the surface. I can only imagine a few of them were in the mid to upper 20's. However, in typical Yuba fashion, those fish are smart and hard to catch.

I tried a lot of flies and although they were eating. Between the driving wind and being unclear on what they were eating, it wasn't happening. I finally worked myself down river and crossed again. There were now around 7 people in this area fishing. I saw one guy catch one, but that was it. At least I wasn't alone in my futility.

While I haven't been skunked, the last few outings have been really slow. Sure, I've gotten some smaller guys, but even they were few and far between. What was even more frustrating about this day on the Yuba were all the fish I could see and actively feeding at that. It just wasn't happening.

I decided to give it a rest above the 20. I went back to the car and decided to do some exploring. I'm not going to tell you where I went, because the area can't handle too much fishing pressure. But, what I will say is that there wasn't a soul in sight. It took a while to drive to, but once there, you could access the water without much walking. A nice change of pace.

One thing really annoyed me though. I was swinging in a piece of water as a guide in a drift boat decided that I must have been in his space. He not only went over my line, but after the drift through the run, he rowed back up two more times. Each time, he again crossed my line and didn't as much as say “sorry” or “do you mind?”. How rude. This sort of stuff really pisses me off. I know who the guide is, he posts on Kienes forum. But, I'm going to keep my trap shut. What an ass. Have some respect. Just because you have a boat and a paying client to satisfy doesn't mean you have a free pass to drift over my line and sit there keeping me from casting again.

Other than those few moments, the day was good. The rain didn't last long and although the fish were not cooperating, I got to explore some new water that I'll visit again.

Mar 27, 2009

Trip Report: Lower Stan

Tuesday was another day on the Lower Stan. If you recall, I put out an open invitation to see if anyone would show up. It was a shot in the dark. However, surprisingly enough, someone took the challenge. I had a great time with Tim and hopefully we'll meet up again sometime.

If you read my previous post about spey casting a single-hander, you already know that I spent some time messing around. The reason I was able to do so much of that, is that the fishing stunk. Plain and simple. On Monday afternoon, someone decided to open the flood gates and the river rose quite a bit. As you all know, that can make for some poor fishing. I saw two risers the entire day! That's it.

I caught a few smaller fish, all under 12". But otherwise, the day was eerily silent. No bites, no grabs, no nothing. And I'd say I covered the water from a few inches below the surface to deep down in the pools. I must of tried 50 of the flies I had with me. Tim and I weren't alone, the other people we talked with had nothing.

It was still a beautiful day. In the mid 60's and plenty of sunshine. I showed Tim some of my secret spots that seem to get overlooked by everyone else. In return, he promised to take me to his favorite river to show me around. Can't beat that!

Next time Lower Stan! Next time...

Mar 25, 2009

Spey Casting a Single Hander

Took my single hand rod to the Lower Stan yesterday. What a nice change of pace. I'll just come out and say it. My single hand rod use has improved ten fold since I started using a two hander.

I've always been able to cast over hand. Nothing has changed there. However, in the tight confines of your typical river or creek around here, there is always something behind you limiting your cast. My options used to be a roll cast or simply flicking the thing out there as far as possible. Which usually wasn't very far or very graceful.

Now that I'm decent enough in the various spey casts thanks to the switch and spey rods, I was able to spey cast my single hander as far as I needed. More than 50 feet at times. What a difference. You probably know this is coming, but I now prefer spey casting to overhead when using the one hander. Why? Because it is less work and requires no false casts. You can whip that sucker out there in a couple of moves. Even if you are making a wholesale direction change.

The only downside was when I had a few split shot on and a heavy fly at the same time. It started to get sloppy. The WF line just didn't have enough weight upfront to turn it over smoothly.

Something else I tried, that I've never done before on a river is to put on a full sinking line instead of a floater. This provided a few benefits. First it sunk, just like it is supposed to. And since I was doing sub surface fishing, that was perfect. Second, the 40 foot head is completely clear. Less likely to scare the fish off.

I won't be giving up my two handed rod anytime soon. However, I can say that I have a new found joy for casting single handers again. While it was more fatiguing than using a two hander, it wasn't bad.